Wago - 750-671
- Technical data - Functions:Absolute/relative positioning, setpoint change on the fly, rotary axis, etc.
- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A-C, G) green: Input 1, Input 2, Power Supply, Enable; LED (E, F) yellow: Run, Run Program Active; LED (H) red: Error
- Technical data - Number of outgoing power jumper contacts:2
- Technical data - Number of incoming power jumper contacts:2
- Technical data - Data width:12-byte input/output
- Technical data - Voltage range for signal (0):-3 ... +5 VDC
- Technical data - Voltage range for signal (1):15 ... 30 VDC
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Supply voltage (field):24 VDC (-25 ... +30 %); via power jumper contacts (power supply via blade contact; transmission (supply voltage field side only) via spring contact)
- Technical data - Stepper frequency (full-step) max.:7,812Hz
- Material data - Color:light gray
- Technical data - Isolation:500 V system/field
- Connection data - Connection type 1:Inputs/Outputs
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Resolution:15 bits + 16 bit prescaler
- Technical data - Number of outputs:1 stepper motor (2 phases/bipolar)
- Technical data - Input filter:100 µs, software filter can be connected
- Physical data - Width:12 mm / 0.472 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):0 ... +55 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Environmental requirements - Vibration resistance:per IEC 60068-2-6
- Technical data - Current consumption (5 V system supply):85mA
- Technical data - Input current (typ.):2.8 mA
- Commercial data - GTIN:4045450000000
- Commercial data - ETIM 8.0:EC001601
- Commercial data - ETIM 7.0:EC001601
- Commercial data - eClass 10.0:27-24-26-05
- Commercial data - eClass 9.0:27-24-26-05
- Commercial data - Customs tariff number:85389099990
- sku_code:750-671
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_General approvals:KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-MCM750
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for hazardous areas:
- ATEX - TUEV Nord Cert GmbH - EN 60079-0 - certificate TUEV14ATEX148929X (II 3 G Ex ec IIC T4 Gc)
- CCCEx - CQST/CNEx - CNCA-C23-01 - certificate 2020312310000213 (Ex ec IIC T4 Gc)
- IECEx - TUEV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 14.0035 X (Ex ec IIC T4 Gc)
- INMETRO - TUV Rheinland do Brasil Ltda. - IEC 60079-0 - certificate TUV 12.1297 X
- UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX003X_ec
- Environmental requirements - Exposure to pollutants:Per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Commercial data - Country of origin:DE
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_SystemBox:
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- ACCESSORIES_Supplymodule:
- 750-601
- 750-602
- 750-610
- 750-612
- manufacturer_description:Stepper Controller; 24 VDC; 1.5 A
- picture_filename_1:1024-02000011000286f5000100b6-DE.jpg
- picture_zoom_filename_1:2000-02000011000286f5000100b6-DE.jpg
- Material data - Weight:51.8g
- Material data - Fire load:0.965MJ
- picture_filename_2:1024-0200000200002a1a000100b6-EN.jpg
- picture_zoom_filename_2:2000-0200000200002a1a000100b6-EN.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:
The 750-671 Module is an intelligent stepper controller with an on-board power driver designed to control two-phase stepper motors up to 24 V/1.5 A.
The 64 times microstepping prevents step losses due to resonance in the acceleration phases and reduces wear on the mechanical parts.
Adjustable current limits for stop, acceleration and constant speed help minimize motor power dissipation.
Two configurable inputs for start/stop, limit switches, reference cams, jog/tip, etc., are directly processed by the internal software without delay.
Versatile functions, such as positioning with different acceleration slopes, command tables, camshaft controller, auto referencing and other event-dependent properties provide this controller with a wide spectrum of possible uses.
The programmer's interface is the same for all WAGO Stepper Controllers.
- Physical data - Depth:67.8 mm / 2.669 inches
- Commercial data - Product Group:15 (I/O System)
- picture_filename_3:1024-0200000200002dea000100b6-EN.jpg
- picture_zoom_filename_3:2000-0200000200002dea000100b6-EN.jpg
- picture_filename_4:1024-5892855-EN.jpg
- picture_zoom_filename_4:2000-5892855-EN.jpg
- Physical data - Depth from upper-edge of DIN-rail:60.6 mm / 2.386 inches
- picture_filename_5:1024-0200002600039bd5000100b6-DE.jpg
- picture_zoom_filename_5:2000-0200002600039bd5000100b6-DE.jpg
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2
- Technical data - Number of digital inputs:2
- Technical data - Device-specific:Operating modes: Individual positioning, reference run, jog, tip, command tables
- Primary brand: Wago
- Functions: Stepper mtr. controller
- Design: 18-32.5Vdc adjustable suppl. to field sensing devices
- Supply voltage (DC): 5Vdc (supplied by system)
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Digital inputs:
- 2 x digital inputs (24Vdc transistor)
- Digital inputs voltage ranges -3...+5Vdc (OFF) / 15-30Vdc (ON)
- Digital outputs: 1 x digital output (2-Phase / bipolar / 1.5A / 7812Hz)
- Dimensions: H100mm x W12mm x D67.8mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: 0°C...+55°C
- Ambient air temperature for storage: -40°C...+85 °C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance: Shock resistance according to EN 60068-2-27 --15g
- Current consumption: 85mA (5Vdc; system supply)
- GTIN code: 4045450000000
- ETIM code: EC001601
- eClass code: 27-24-26-05
- Customs Tariff Number: 85389099990
- Order code / Manufacturer SKU: 750-671
- Manufacturer product status: Commercialized
- Equivalent to: 750671
- EAN code: 4045450000000
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-3
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-MCM750
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for hazardous areas
- - ATEX - TUV Nord Cert GmbH - EN 60079-0 - certificate TUV14ATEX148929X (II 3 G Ex ec IIC T4 Gc)
- - CCCEx - CQST/CNEx - CNCA-C23-01 - certificate 2020312310000213 (Ex ec IIC T4 Gc)
- - IECEx - TUV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 14.0035 X (Ex ec IIC T4 Gc)
- - INMETRO - TUV Rheinland do Brasil Ltda. - IEC 60079-0 - certificate TUV 12.1297 X
- - UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX003X_ec
- RoHS compliant
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 750-601
- 750-602
- 750-610
- 750-612
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- Level 1 category: Automation components
- Level 2 category: Motor & motion control
- Level 3 category: Motion control (Servo motors and Drives)
- Level 4 category: Stepper motor controllers
- Product title: Stepper mtr. controller - Wago
Main function | Stepper motor controller |
---|---|
Product series / family name | 750 series |
Supply voltage (DC) | 5Vdc |
Connection type (electrical) | Terminals (Spring) |
Mounting mode | DIN rail |
Degree of protection | IP20 |
Type - Option | Standard (No options) |