- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A) green: Communication; LED (B-G) red: Error L1, Override in Current Measurement Path (display), Undervoltage in Voltage Measurement Path (display), Error L2, Error L3, Override in Voltage Measurement Path (display); LED (H) yellow: Interchange in Phase Sequence L1-L2-L3
- Technical data - Data width:2 x 48-bit data; 2 x 24-bit control/status (optional)
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Limit frequency:7.2kHz
- Technical data - Frequency range (mains frequency):45 ... 65 Hz
- Technical data - Frequency range with activated DC filter:10 ... 2000 Hz
- Technical data - Frequency range with deactivated DC filter:0 ... 2000 Hz
- Material data - Color:light gray
- Technical data - Rated voltage:ULN = 277 VAC/DC; ULL = 480 VAC
- Technical data - Isolation:4 kV system/field
- Technical data - Rated surge voltage:4 kV
- Connection data - Connection type 1:Inputs/outputs
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Signal type:Power measurement
- Technical data - Resolution [bit]:16bits
- Technical data - Number of measurement inputs:6 (3 voltage measurement inputs, 3 current measurement inputs)
- Technical data - Current path input resistance (typ.):22 mΩ
- Technical data - Voltage path input resistance (typ.):1071kΩ
- Technical data - Measurement error, deviation (max.) from the upper-range value:0.006
- Technical data - Measurement error (reference temperature):25°C
- Technical data - Reference for measurement error:AC current/voltage
- Physical data - Width:12 mm / 0.472 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):-20 ... +60 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Relative humidity (with condensation):Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of -20 to +60 °C (except for wind-driven precipitation, water and ice formation)
- Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Environmental requirements - Vibration resistance:per IEC 60068-2-6
- Technical data - Current consumption (5 V system supply):100mA
- Commercial data - GTIN:4055140000000
- Commercial data - ETIM 8.0:EC001601
- Commercial data - ETIM 7.0:EC001601
- Commercial data - eClass 10.0:27-24-26-05
- Commercial data - eClass 9.0:27-24-26-05
- Commercial data - Customs tariff number:85389099990
- sku_code:750-493/025-000
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:
- KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-AIM750
- UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- approvals_Approvals for hazardous areas:
- ATEX - TUEV Nord Cert GmbH - EN 60079-0 - certificate TUEV14ATEX148929X (II 3 G Ex ec IIC T4 Gc)
- CCCEx - CQST/CNEx - CNCA-C23-01 - certificate 2020312310000213 (Ex ec IIC T4 Gc)
- IECEx - TUEV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 14.0035 X (Ex ec IIC T4 Gc)
- INMETRO - TUV Rheinland do Brasil Ltda. - IEC 60079-0 - certificate TUV 12.1297 X
- UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX003X_ec
- UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- Environmental requirements - Exposure to pollutants:per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Commercial data - Country of origin:DE
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_SystemBox:
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- ACCESSORIES_Power_tap:
- 855-8001
- 855-8002
- 855-8003
- 855-8004
- ACCESSORIES_PotentialDistribution:855-951/250-000
- ACCESSORIES_CurrentTransformer:
- 2007-8873
- 2007-8875
- 855-1001/2500-1001
- 855-1700/032-000
- 855-2701/035-001
- 855-2701/064-001
- 855-3001/060-003
- 855-3001/100-003
- 855-3001/200-001
- 855-3001/250-001
- 855-301/050-103
- 855-301/060-101
- 855-301/075-201
- 855-301/100-201
- 855-301/150-501
- 855-301/200-501
- 855-301/250-501
- 855-301/400-1001
- 855-301/600-1001
- 855-4001/100-001
- manufacturer_description:3-Phase Power Measurement; 480 VAC, 1 A; Ext. Temperature
- picture_filename_1:1024-0200000f00001902000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200000f00001902000100b6-DE.jpg
- Material data - Weight:50g
- Material data - Fire load:0.953MJ
- picture_filename_2:1024-0200000600022385000100b6-EN.jpg
- picture_zoom_filename_2:2000-0200000600022385000100b6-EN.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:
The 3-phase power measurement module measures electrical data in a three-phase supply network.
The voltage is measured via network connection to clamping points L1, L2, L3 and N.
The current of the three phases is fed to IL1, IL2, IL3, and IN via current transformers.
The 3-phase power measurement module transmits the root mean square values into the process image without requiring high computing power from the controller. For each phase, the effective power (P) and the energy consumption (W) are calculated by the 3-phase power measurement module using the root mean square values for all measured voltages (V) and currents (I). For example, both the apparent power (S) and phase shift angle (phi) can be easily derived from these values.
Therefore, the 3-phase power measurement module provides comprehensive network analysis via fieldbus. Metrics, such as effective and apparent power consumption or load condition, enable the operator to optimize supply to a drive or machine. This can protect the installation from damage and failure.
- Physical data - Depth:67.8 mm / 2.669 inches
- Commercial data - Product Group:15 (I/O System)
- picture_filename_3:1024-02000006000221b1000100b6-DE.jpg
- picture_zoom_filename_3:2000-02000006000221b1000100b6-DE.jpg
- picture_filename_4:1024-0200002600035bb5000100b6-DE.jpg
- picture_zoom_filename_4:2000-0200002600035bb5000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:60.6 mm / 2.386 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2
- Primary brand: Wago
- Functions: Standard analog input slice module
- Design:
- extended temperature range
- for 3-phase pwr. measurement
- Supply voltage (DC): 5Vdc (supplied by system)
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Analog inputs: 6 x analog inputs (3-phase pwr. measurement; 277Vac/Vdc / 480Vac / 1A / 45...65Hz / 16-bits conversion)
- Measurement accuracy: AC current/voltage; +-0.6% (measuring error)
- Dimensions: H100mm x W12mm x D67.8mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: -20°C...+60°C
- Ambient air temperature for storage: -40°C...+85°C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance: Shock resistance according to EN 60068-2-27 --15g
- Current consumption: 100mA (5Vdc; system supply)
- GTIN code: 4055140000000
- ETIM code: EC001601
- eClass code: 27-24-26-05
- Customs Tariff Number: 85389099990
- Order code / Manufacturer SKU: 750-493/025-000
- Manufacturer product status: Commercialized
- Equivalent to: 750493000000
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-3
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-AIM750
- - UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- Approvals for hazardous areas
- - ATEX - TUV Nord Cert GmbH - EN 60079-0 - certificate TUV14ATEX148929X (II 3 G Ex ec IIC T4 Gc)
- - CCCEx - CQST/CNEx - CNCA-C23-01 - certificate 2020312310000213 (Ex ec IIC T4 Gc)
- - IECEx - TUV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 14.0035 X (Ex ec IIC T4 Gc)
- - INMETRO - TUV Rheinland do Brasil Ltda. - IEC 60079-0 - certificate TUV 12.1297 X
- - UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX003X_ec
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2007-8873
- 2007-8875
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- 855-1001/2500-1001
- 855-1700/032-000
- 855-2701/035-001
- 855-2701/064-001
- 855-3001/060-003
- 855-3001/100-003
- 855-3001/200-001
- 855-3001/250-001
- 855-301/050-103
- 855-301/060-101
- 855-301/075-201
- 855-301/100-201
- 855-301/150-501
- 855-301/200-501
- 855-301/250-501
- 855-301/400-1001
- 855-301/600-1001
- 855-4001/100-001
- 855-8001
- 855-8002
- 855-8003
- 855-8004
- 855-951/250-000
- Level 1 category: Automation components
- Level 2 category: Programmable Logic Controllers & components
- Level 3 category: I-O Units
- Product title: Standard analog input slice module - Wago
| Main function | I/O unit |
|---|---|
| Product series / family name | 750 series |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Digital inputs quantity | no digital inputs |
| Digital outputs quantity | no digital outputs |
| Analog inputs quantity | 6 |
| Analog inputs type | Current, Voltage |
| Analog input resolution | 16-bit |
| Analog outputs quantity | no analog outputs |
| Degree of protection | IP20 |
| Type - Installation | in cabinet |
| Type - Option | extended temperature range, special version (for 3-phase power measurement) |
Write Your Own Review