- Technical data - Configuration options:PROFIsafe address adjustable via DIP switch or engineering software
- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A-D) green/red: Status/Error I1 ... I4; LED (E) red: Group error; LED (F-H) green/red: Diagnostics
- Technical data - Number of outgoing power jumper contacts:2
- Technical data - Number of incoming power jumper contacts:2
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Supply voltage (field):24 VDC, SELV/PELV (-15 ... +20 %); via power jumper contacts (power supply via blade contact; transmission (supply voltage field side only) via spring contact)
- Technical data - Signal frequency (max.):50Hz
- Technical data - Current carrying capacity (power jumper contacts):10A
- Material data - Color:yellow
- Technical data - Total number of channels (module):4
- Technical data - Isolation:500 V system/field
- Connection data - Connection type 1:Inputs/Outputs
- Mechanical Data - Pluggable connector:Pluggable
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Sensor connection:4 x (Fail-safe input with test pulse)
- Technical data - Input characteristic:
- clock sensitive
- Type 1 per IEC 61131
- Technical data - Signal type:
- Digital
- Voltage
- Technical data - Signal type (voltage):24 VDC
- Physical data - Width:12 mm / 0.472 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):0 ... +55 °C
- Environmental requirements - Ambient temperature (storage):-25 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Environmental requirements - Vibration resistance:4g per IEC 60068-2-6
- Technical data - Current consumption (5 V system supply):145mA
- Technical data - Current consumption, field supply (module with no external load):20mA
- Technical data - Input current per channel for signal (1) typ.:2.2mA
- Commercial data - GTIN:4050820000000
- Commercial data - ETIM 8.0:EC001599
- Commercial data - ETIM 7.0:EC001599
- Commercial data - eClass 10.0:27-24-26-04
- Commercial data - eClass 9.0:27-24-26-04
- Commercial data - Customs tariff number:85389099990
- sku_code:753-661/000-003
- Commercial data - End of Sale:45107
- Commercial data - End of Delivery:45352
- Commercial data - End of Production:45291
- Commercial data - End of Service and Repair:46082
- successor_model:753-661/000-004
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:
- KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-DIM750
- UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- BSH - Bundesamt fuer Seeschifffahrt und Hydrographie - certificate 1104
- DNV - DNV GL SE - DNV-CG-0339 / Aug.2021 - certificate TAA0000194
- PRS - Polski Rejestr Statkow - certificate TE/1101/880590/23
- RINA - RINA Germany GmbH - certificate ELE343521XG001
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- approvals_Approvals for hazardous areas:
- ATEX - TUEV Nord Cert GmbH - EN 60079-0 - certificate TUEV14ATEX148929X (II 3 G Ex ec IIC T4 Gc)
- CCCEx - CQST/CNEx - CNCA-C23-01 - certificate 2020312310000213 (Ex ec IIC T4 Gc)
- EAC - Brjansker Zertifizierungsstelle - TP TC 012/2011 - certificate EAC RU C-DE.AM02.B.00163/19 (2Ex nA IIC T4 Gc X)
- IECEx - TUEV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 14.0035 X (Ex ec IIC T4 Gc)
- INMETRO - TUV Rheinland do Brasil Ltda. - IEC 60079-0 - certificate TUV 12.1297 X
- UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX003X_ec
- UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- Environmental requirements - Exposure to pollutants:Per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Functional Safety - Safety standards:IEC 61508-1 ... -7; EN ISO 13849-1; EN 62061
- approvals_Approvals for functional safety:Prod. Safety Funct. Safety - TUEV Rheinland Industrie Service GmbH - certificate No. 968_FSP 2387_00_22
- Commercial data - Country of origin:DE
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_SystemBox:
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- ACCESSORIES_Supplymodule:
- 750-601
- 750-602
- 750-610
- 750-612
- 753-602
- 753-612
- ACCESSORIES_PluggableWiringTier:753-150
- mandatory_ACCESSORIES_PluggableWiringTier:753-120
- manufacturer_description:Fail-safe 4-channel digital input; 24 VDC; PROFIsafe V2.0 iPar
- picture_filename_1:1024-0200001200016e12000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001200016e12000100b6-DE.jpg
- Material data - Weight:54g
- Material data - Fire load:0.843MJ
- picture_filename_2:1024-0200000e0002a619000100b6-EN.jpg
- picture_zoom_filename_2:2000-0200000e0002a619000100b6-EN.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:
This PROFIsafe Module (75x-661/000-003) connects to potential-free emergency stop buttons with contacts, safety interlock switches, operating mode switches, safety sensors and semiconductor outputs.
The module features four clock-sensitive inputs (I1 ... I4) that are fed via two differently clocked outputs (T1 ... T2).
Clock outputs are short-circuit-protected. Inputs are continually monitored for cross circuits and power supply from separate sources. Additional safety-relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O-CHECK.
The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI).When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch located on the side of the module, or via WAGO-I/O-CHECK.
The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols.
Field and system levels are electrically isolated.
Individual modules can be arranged in any combination when configuring the fieldbus node.
To protect the module against impulse voltages (over-voltage protection per IEC 61000-4-5), a WAGO Filter Module or an external surge filter must be used for the 24V supply voltage.
Additional information can be found in the product manual (available in German and English).
- Physical data - Depth:69 mm / 2.717 inches
- Commercial data - Product Group:15 (I/O System)
- picture_filename_3:1024-0200000e0002a7c9000100b6-DE.jpg
- picture_zoom_filename_3:2000-0200000e0002a7c9000100b6-DE.jpg
- picture_filename_4:1024-0200002600039755000100b6-DE.jpg
- picture_zoom_filename_4:2000-0200002600039755000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:61.8 mm / 2.433 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-4, marine applications
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2, marine applications
- Technical data - Number of digital inputs:4
- Primary brand: Wago
- Functions: Pluggable fail-safe / safety DC digital input slice module
- Supply voltage (DC):
- 5Vdc (supplied by system)
- 20.4-28.8Vdc (SELV/PELV) adjustable suppl. to field sensing devices
- Programming languages:
- Configuration options
- - PROFIsafe address adjustable via DIP switch or engineering software
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Digital inputs: 4 x digital inputs (fail-safe inputs with test pulse; type-1; clock sensitive; 24Vdc)
- Dimensions: H100mm x W12mm x D69mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: 0°C...+55°C
- Ambient air temperature for storage: -25°C...+85°C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance:
- Vibration resistance according to EN 60068-2-6 -- 4g
- Shock resistance according to EN 60068-2-27 --15g
- Current consumption:
- 145mA (5Vdc; system supply)
- 20mA (field supply; no external load)
- GTIN code: 4050820000000
- ETIM code: EC001599
- eClass code: 27-24-26-04
- Customs Tariff Number: 85389099990
- Order code / Manufacturer SKU: 753-661/000-003
- Manufacturer product status: Discontinued
- Equivalent to: 753661000000
- Product lifecycle information:
- End of life announced on -- 2023 Mar 01
- End of sales -- 2023 Jun 30
- End of production -- 2023 Dec 31
- End of delivery -- 2024 Mar 01
- End of service and repair -- 2026 Mar 01
- Product replaced by: 753-661/000-004
- Compliant with standard(s):
- IEC61508-1
- IEC61508-2
- IEC61508-3
- IEC61508-4
- IEC61508-5
- IEC61508-6
- IEC61508-7
- EN ISO13849-1
- EN 62061
- EMC immunity to interference
- - EN 61000-6-2
- - marine applications
- EMC emission of interference
- - EN 61000-6-4
- - marine applications
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-DIM750
- - UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - BSH - Bundesamt fuer Seeschifffahrt und Hydrographie - certificate 1104
- - DNV - DNV GL SE - DNV-CG-0339 / Aug.2021 - certificate TAA0000194
- - PRS - Polski Rejestr Statkow - certificate TE/1101/880590/23
- - RINA - RINA Germany GmbH - certificate ELE343521XG001
- Approvals for hazardous areas
- - ATEX - TUV Nord Cert GmbH - EN 60079-0 - certificate TUV14ATEX148929X (II 3 G Ex ec IIC T4 Gc)
- - CCCEx - CQST/CNEx - CNCA-C23-01 - certificate 2020312310000213 (Ex ec IIC T4 Gc)
- - EAC - Brjansker Zertifizierungsstelle - TP TC 012/2011 - certificate EAC RU C-DE.AM02.B.00163/19 (2Ex nA IIC T4 Gc X)
- - IECEx - TUV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 14.0035 X (Ex ec IIC T4 Gc)
- - INMETRO - TUV Rheinland do Brasil Ltda. - IEC 60079-0 - certificate TUV 12.1297 X
- - UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX003X_ec
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- Approvals for functional safety
- - Prod. Safety Funct. Safety - TUV Rheinland Industrie Service GmbH - certificate No. 968_FSP 2387_00_22
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Class: Safety SIL3/Cat4/PLe
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 753-120
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 750-601
- 750-602
- 750-610
- 750-612
- 753-150
- 753-602
- 753-612
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- Level 1 category: Safety components
- Level 2 category: Safety I-O Units
- Product title: Pluggable fail-safe / safety DC digital input slice module - Wago
Main function | Safety I/O unit |
---|---|
Product series / family name | 753 series |
Connection type (electrical) | Terminals (Spring) |
Communication protocol | PROFIsafe |
Mounting mode | DIN rail |
Digital inputs quantity | 4 |
Digital inputs type | DC |
Digital outputs quantity | no digital outputs |
Analog inputs quantity | no analog inputs |
Analog outputs quantity | no analog outputs |
Degree of protection | IP20 |
Type - Installation | in cabinet |
Type - Option | special version (pluggable connector) |