Wago - 281-684

$3.28

Wago - 281-684 is available to buy in increments of 1

Overview

3-conductor through terminal block; 4 mm²; suitable for Ex i applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; blue

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Connection data - Number of levels:1
Connection data - Connection 1 - Actuation type:Operating tool
Connection data - Connection 1 - Wiring direction:Front-entry wiring
Mechanical Data - Design:horizontal type
Connection data - Total number of potentials:1
Electrical data - Ratings per IEC/EN - Rated current:32A
Electrical data - Power Loss - Rated current In for specified power loss:32A
Material data - Color:blue
Electrical data - Ratings per IEC/EN - Nominal voltage (III/3):800V
Electrical data - Ratings per IEC/EN - Rated impulse voltage (III/3):8kV
Connection data - Connection 1 - Connection technology:CAGE CLAMP^(R)
Connection data - Connection 1 - Solid conductor:0.08 ... 4 mm2 / 28 ... 12 AWG
Connection data - Connection 1 - Fine-stranded conductor:0.08 ... 4 mm2 / 28 ... 12 AWG
Mechanical Data - Mounting type:DIN-35 rail
Physical data - Width:6 mm / 0.236 inches
Material data - Note (material data):
Information on material specifications can be found here
Material data - Insulation material:Polyamide (PA66)
Connection data - Connection 1 - Connectable conductor materials:
- Copper
- Aluminum
Connection data - Connection 1 - Connectable conductor materials (note):Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO â€œAlu-Plus" Contact Paste 249-130 is used for termination.

â€œAlu-Plus" Contact Paste Advantages:
- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
Using terminal blocks with CAGE CLAMP^(R) Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with â€œAlu-Plus" Contact Paste.

It is also possible to apply WAGO â€œAlu-Plus" additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm2 = 16 A
4 mm2 = 22 A
Environmental requirements - Processing temperature:-35 ... +85 °C
Environmental requirements - Continuous operating temperature:-60 ... +105 °C
Commercial data - GTIN:4044920000000
Commercial data - ETIM 8.0:EC000897
Commercial data - ETIM 7.0:EC000897
Commercial data - eClass 10.0:27-14-11-20
Commercial data - eClass 9.0:27-14-11-20
Commercial data - Customs tariff number:85369010000
Electrical data - Power Loss - Power loss, per pole (potential):1.024W
sku_code:281-684
Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
approvals_General approvals:
- CCA - DEKRA Certification B.V. - IEC 60947 - certificate NTR NL-7454/A1
- CSA - CSA Group - C22.2 - certificate 1505034
- KEMA/KEUR - DEKRA Certification B.V. - EN 60947 - certificate 71-107288
- UL - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
Electrical data - Ratings per IEC/EN - Ratings per:IEC/EN 60947-7-1
Material data - Flammability class per UL94:V0
Material data - Material group:I
approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - certificate 20-HG1941090-PDA
- BV - Bureau Veritas S.A. - EN 60947 - certificate 07436/F0 BV
- DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
Commercial data - Country of origin:DE
Mechanical Data - Marking level:Center marking
Electrical data - Ratings per IEC/EN - Legend (ratings):(III / 3) Overvoltage category III / Pollution degree 3
ACCESSORIES_Markingaccessories:
- 2009-115
- 2009-115/000-002
- 2009-115/000-006
- 2009-115/000-007
- 2009-115/000-012
- 2009-115/000-017
- 2009-115/000-023
- 2009-115/000-024
- 209-140
- 209-141
- 209-142
- 249-105
- 793-501
- 793-501/000-002
- 793-501/000-005
- 793-501/000-006
- 793-501/000-007
- 793-501/000-012
- 793-501/000-017
- 793-501/000-023
ACCESSORIES_Tools:
- 210-657
- 210-658
- 210-720
ACCESSORIES_Ferrule:
- 216-106
- 216-201
- 216-202
- 216-203
- 216-204
- 216-205
- 216-206
- 216-241
- 216-242
- 216-243
- 216-244
- 216-246
- 216-301
- 216-302
ACCESSORIES_Assembling:
- 209-106
- 249-116
- 709-153
- 709-167
ACCESSORIES_Check:
- 209-170
- 249-144
- 249-145
- 249-146
- 249-147
- 249-148
- 280-404
- 281-407
- 281-418
- 281-419
ACCESSORIES_Jumper:
- 210-103
- 210-123
- 281-402
- 281-409
- 281-422
- 281-482
- 281-483
- 281-485
- 281-490
- 281-492
- 283-414
- 284-414
- 709-110
- 709-111
- 709-112
- 781-452
- 781-453
- 781-454
- 781-455
- 781-456
ACCESSORIES_Insulationstop:
- 281-470
- 281-471
- 281-472
mandatory_ACCESSORIES_Endplate:
- 281-324
- 281-326
ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
ACCESSORIES_ProtectiveWarningMarker:281-415
ACCESSORIES_Push_Intypewirejumper:
- 249-123
- 249-125
- 249-126
- 249-127
ACCESSORIES_Endplate:
- 284-334
- 284-344
manufacturer_description:3-conductor through terminal block; 4 mm2; suitable for Ex i applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP(R); 4,00 mm2; blue
picture_filename_1:1024-0200000600037540000100b6-DE.jpg
picture_zoom_filename_1:2000-0200000600037540000100b6-DE.jpg
Material data - Weight:10.9g
Material data - Fire load:0.268MJ
picture_filename_2:1024-020000060003736f000100b6-DE.jpg
picture_zoom_filename_2:2000-020000060003736f000100b6-DE.jpg
Physical data - Height:73.5 mm / 2.894 inches
picture_filename_3:1024-0200001900030f09000100b6-DE.jpg
picture_zoom_filename_3:2000-0200001900030f09000100b6-DE.jpg
Physical data - Depth from upper-edge of DIN-rail:29 mm / 1.142 inches
Electrical data - Power Loss - Resistance value for specified, current-dependent power loss:0.001Ω
Primary brand: Wago
Functions: Neutral-through terminal block
Design:
- 1-deck/level
- center marking slot
- Suitable for Ex I applications
Poles: Neutral-through pole (N)
Rated current:
- (IEC) 32A
- (UL) 20A
- (CSA) 25A
Color: Blue
Connection capacity: 3-wires (1 clamp + 2 clamps) (1+2)
Rated operating voltage (Ue):
- (IEC) 800V
- (UL) 600V
- (CSA) 600V
Rated impulse voltage (Uimp): (IEC) 8kV
Connection type: CAGE CLAMP spring connections
Cross-section:
- for 0.08mm2...4mm2 fine stranded or solid conductors
- for #28AWG...#12AWG fine stranded or solid conductors
Mounting mode: DIN-35 rail (35 x 15 / 35 x 7.5)
Dimensions: H73.5mm x W6mm x D29mm
Net Width (mm): 6mm
Material: Polyamide (PA) 66
GTIN code: 4044920000000
ETIM code: EC000897
eClass code: 27-14-11-20
Customs Tariff Number: 85369010000
Order code / Manufacturer SKU: 281-684
Manufacturer product status: Commercialized
Equivalent to: 281684
EAN code: 4044920000000
Compliant with standard(s):
- General approvals
- - CCA - DEKRA Certification B.V. - IEC 60947 - certificate NTR NL-7454/A1
- - CSA - CSA Group - C22.2 - certificate 1505034
- - KEMA/KEUR - DEKRA Certification B.V. - EN 60947 - certificate 71-107288
- - UL - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - certificate 20-HG1941090-PDA
- - BV - Bureau Veritas S.A. - EN 60947 - certificate 07436/F0 BV
- - DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- RoHS compliant
- V-0 flammability rating
Location of origin: Germany
Cross-sells with:
- 281-324
- 281-326
- 2009-115
- 2009-115/000-002
- 2009-115/000-006
- 2009-115/000-007
- 2009-115/000-012
- 2009-115/000-017
- 2009-115/000-023
- 2009-115/000-024
- 209-106
- 209-140
- 209-141
- 209-142
- 209-170
- 210-103
- 210-112
- 210-113
- 210-114
- 210-115
- 210-123
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 210-657
- 210-658
- 210-720
- 216-106
- 216-201
- 216-202
- 216-203
- 216-204
- 216-205
- 216-206
- 216-241
- 216-242
- 216-243
- 216-244
- 216-246
- 216-301
- 216-302
- 249-105
- 249-116
- 249-123
- 249-125
- 249-126
- 249-127
- 249-144
- 249-145
- 249-146
- 249-147
- 249-148
- 280-404
- 281-402
- 281-407
- 281-409
- 281-415
- 281-418
- 281-419
- 281-422
- 281-470
- 281-471
- 281-472
- 281-482
- 281-483
- 281-485
- 281-490
- 281-492
- 283-414
- 284-334
- 284-344
- 284-414
- 709-110
- 709-111
- 709-112
- 709-153
- 709-167
- 781-452
- 781-453
- 781-454
- 781-455
- 781-456
- 793-501
- 793-501/000-002
- 793-501/000-005
- 793-501/000-006
- 793-501/000-007
- 793-501/000-012
- 793-501/000-017
- 793-501/000-023
Level 1 category: Electrical components
Level 2 category: Terminal blocks
Product title: Neutral-through terminal block - 1-deck/level - Wago

More Information

More Information
Main function	Terminal
Product series / family name	281 series
Poles	1N
Rated current	30A < In ≤ 35A
Connection capacity	3-wires (1+2)
Connection type (electrical)	Terminals (Spring)
Cross-section (mm2)	0.08mm2, 4mm2
Cross-section (AWG)	12 AWG, 13 AWG, 14 AWG, 15 AWG, 16 AWG, 17 AWG, 18 AWG, 19 AWG, 20 AWG, 21 AWG, 22 AWG, 23 AWG, 24 AWG, 25 AWG, 26 AWG, 27 AWG, 28 AWG
Mounting mode	DIN rail, DIN rail (NS 35/7.5)
Dimensions (mm)	W6...6.2mm
Type - Conductor insertion and removal	with tool
Type - Decks	1
Type - Terminal	neutral-through
Type - Option	ATEX compliant, special version (with center marking slot)

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account