Wago - 280-990
$3.60
Wago - 280-990 is available to buy in increments of 1
Overview
4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; light gray
- Connection data - Number of levels:1
- Connection data - Connection 1 - Actuation type:Operating tool
- Connection data - Connection 1 - Wiring direction:Front-entry wiring
- Connection data - Total number of potentials:1
- Electrical data - Ratings per UL - Rated current UL (Use Group C):20A
- Electrical data - Ratings per CSA - Rated current CSA (Use Group C):24A
- Electrical data - Power Loss - Rated current In for specified power loss:22A
- Electrical data - Ex information - Rated current (Ex e II):22A
- Material data - Color:light gray
- Electrical data - Ratings per UL - Rated voltage UL (Use Group C):600V
- Electrical data - Ratings per CSA - Rated voltage CSA (Use Group C):600V
- Electrical data - Ex information - Rated voltage EN (Ex e II):550V
- Electrical data - Ex information - Note (rated voltage):Using staggered jumpers reduces the maximum rated voltage to 275 V.
- Connection data - Connection 1 - Connection technology:CAGE CLAMP(R)
- Connection data - Connection 1 - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Connection 1 - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Connection 1 - Note (conductor cross-section):12 AWG: THHN, THWN
- Mechanical Data - Mounting type:DIN-35 rail
- Physical data - Width:5 mm / 0.197 inches
- Material data - Note (material data):
Information on material specifications can be found here - Material data - Insulation material:Polyamide (PA66)
- Connection data - Connection 1 - Connectable conductor materials:
- Copper
- Aluminum
- Connection data - Connection 1 - Connectable conductor materials (note):Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO “Alu-Plus" Contact Paste 249-130 is used for termination.
“Alu-Plus" Contact Paste Advantages:- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
Using terminal blocks with CAGE CLAMP(R) Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus" Contact Paste.
It is also possible to apply WAGO “Alu-Plus" additionally on the whole surface of the aluminum conductor before termination.
Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm2 = 16 A
4 mm2 = 22 A - Environmental requirements - Processing temperature:-35 ... +85 °C
- Environmental requirements - Continuous operating temperature:-60 ... +105 °C
- Commercial data - GTIN:4044920000000
- Commercial data - ETIM 8.0:EC000897
- Commercial data - ETIM 7.0:EC000897
- Commercial data - eClass 10.0:27-14-11-20
- Commercial data - eClass 9.0:27-14-11-20
- Commercial data - Customs tariff number:85369010000
- Electrical data - Power Loss - Power loss, per pole (potential):0.644W
- sku_code:280-990
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_General approvals:
- CCA - DEKRA Certification B.V. - EN 60947 - certificate 2157201.01
- CSA - DEKRA Certification B.V. - C22.2 - certificate 1536071
- UL - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Electrical data - Ratings per IEC/EN - Ratings per:IEC/EN 60947-7-1
- Material data - Flammability class per UL94:V0
- Material data - Material group:I
- approvals_Declarations of conformity and manufacturer's declarations:
- ATEX-Attestation of Conformity - WAGO GmbH & Co. KG - certificate -
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- Electrical data - Ratings per UL - Approvals per:UL 1059
- Electrical data - Ratings per CSA - Approvals per:CSA 22.2 No 158
- approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - EN 60947 - certificate 20-HG1941090-PDA
- BV - Bureau Veritas S.A. - EN 60947 - certificate 07436/F0 BV
- DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- approvals_Approvals for hazardous areas:
- AEx - UL International Germany GmbH c/o Physikalisch Technische Bundesanstalt - UL 60079 - certificate E185892 (AEx e II resp. Ex e II)
- ATEX - Physikalisch Technische Bundesanstalt - IEC 60079-0 - certificate PTB 99 ATEX 3109 U (Ex eb IIC / IM 2 Ex eb IMb)
- CCC - CNEX - GB/T 3836.3 - certificate 2020312313000232 (Ex eb IIC Gb / Ex eb I Mb)
- EAC - Brjansker Zertifizierungsstelle - TP TC 012/2011 - certificate RU C-DE.AM02.B.00127/19
- IECEx - Physikalisch Technische Bundesanstalt - IEC 60079-0 - certificate IECEx PTB 03.0004U (Ex eb IIC Gb or Ex eb I Mb)
- Electrical data - Ex information - Ratings per:ATEX: PTB 99 ATEX 3109 U / IECEx: PTB 03.0004U (Ex eb IIC Gb or Ex eb I Mb)
- Commercial data - Country of origin:DE
- Mechanical Data - Marking level:Side marking
- ACCESSORIES_Markingaccessories:
- 2009-115
- 2009-115/000-002
- 2009-115/000-006
- 2009-115/000-007
- 2009-115/000-012
- 2009-115/000-017
- 2009-115/000-023
- 2009-115/000-024
- 209-128
- 209-140
- 209-141
- 209-142
- 249-105
- 793-501
- 793-501/000-002
- 793-501/000-005
- 793-501/000-006
- 793-501/000-007
- 793-501/000-012
- 793-501/000-017
- ACCESSORIES_Tools:
- 210-657
- 210-658
- 210-720
- ACCESSORIES_Ferrule:
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- ACCESSORIES_Assembling:
- 209-106
- 249-116
- 709-153
- 709-167
- ACCESSORIES_Jumper:
- 280-402
- 280-409
- 280-422
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 780-452
- 780-453
- 780-454
- 780-455
- 780-456
- 780-457
- 780-458
- ACCESSORIES_Insulationstop:
- 280-470
- 280-471
- 280-472
- mandatory_ACCESSORIES_Endplate:280-364
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ProtectiveWarningMarker:280-415
- ACCESSORIES_Push_Intypewirejumper:
- 249-123
- 249-125
- 249-126
- 249-127
- manufacturer_description:4-conductor through terminal block; 2.5 mm2; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP(R); 2,50 mm2; light gray
- picture_filename_1:1024-0200000500019f18000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200000500019f18000100b6-DE.jpg
- Material data - Weight:8.3g
- Material data - Fire load:0.133MJ
- picture_filename_2:1024-0200001900031149000100b6-DE.jpg
- picture_zoom_filename_2:2000-0200001900031149000100b6-DE.jpg
- Physical data - Height:73 mm / 2.874 inches
- Commercial data - Product Group:1 (Rail Mounted Terminal Blocks)
- Physical data - Depth from upper-edge of DIN-rail:28 mm / 1.102 inches
- Electrical data - Power Loss - Resistance value for specified, current-dependent power loss:0.001Ω
- Primary brand: Wago
- Functions: Feed-through/thru terminal block
- Design:
- 1-deck/level
- lateral marking slots
- Suitable for Ex e II applications
- Poles: 1 feed-through pole (1P)
- Rated current:
- (Ex e II) 22A
- (UL) 20A
- (CSA) 24A
- Color: Light Gray
- Connection capacity: 4-wires (2 clamps + 2 clamps) (2+2)
- Rated operating voltage (Ue):
- (UL) 600V
- (CSA) 600V
- (Ex e II) 550V
- Connection type: CAGE CLAMP spring connections
- Cross-section:
- for 0.08mm2...2.5mm2 fine stranded or solid conductors
- for #28AWG...#12AWG fine stranded or solid conductors
- Mounting mode: DIN-35 rail (35 x 15 / 35 x 7.5)
- Dimensions: H73mm x W5mm x D28mm
- Net Width (mm): 5mm
- Material: Polyamide (PA) 66
- GTIN code: 4044920000000
- ETIM code: EC000897
- eClass code: 27-14-11-20
- Customs Tariff Number: 85369010000
- Order code / Manufacturer SKU: 280-990
- Manufacturer product status: Commercialized
- Equivalent to: 280990
- EAN code: 4044920000000
- Compliant with standard(s):
- General approvals
- - CCA - DEKRA Certification B.V. - EN 60947 - certificate 2157201.01
- - CSA - DEKRA Certification B.V. - C22.2 - certificate 1536071
- - UL - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Declarations of conformity and manufacturer's declarations
- - ATEX-Attestation of Conformity - WAGO GmbH & Co. KG
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - EN 60947 - certificate 20-HG1941090-PDA
- - BV - Bureau Veritas S.A. - EN 60947 - certificate 07436/F0 BV
- - DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- Approvals for hazardous areas
- - AEx - UL International Germany GmbH c/o Physikalisch Technische Bundesanstalt - UL 60079 - certificate E185892 (AEx e II resp. Ex e II)
- - ATEX - Physikalisch Technische Bundesanstalt - IEC 60079-0 - certificate PTB 99 ATEX 3109 U (Ex eb IIC / IM 2 Ex eb IMb)
- - CCC - CNEX - GB/T 3836.3 - certificate 2020312313000232 (Ex eb IIC Gb / Ex eb I Mb)
- - EAC - Brjansker Zertifizierungsstelle - TP TC 012/2011 - certificate RU C-DE.AM02.B.00127/19
- - IECEx - Physikalisch Technische Bundesanstalt - IEC 60079-0 - certificate IECEx PTB 03.0004U (Ex eb IIC Gb or Ex eb I Mb)
- RoHS compliant
- V-0 flammability rating
- Location of origin: Germany
- Cross-sells with:
- 280-364
- 2009-115
- 2009-115/000-002
- 2009-115/000-006
- 2009-115/000-007
- 2009-115/000-012
- 2009-115/000-017
- 2009-115/000-023
- 2009-115/000-024
- 209-106
- 209-128
- 209-140
- 209-141
- 209-142
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 210-657
- 210-658
- 210-720
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- 249-105
- 249-116
- 249-123
- 249-125
- 249-126
- 249-127
- 280-402
- 280-409
- 280-415
- 280-422
- 280-470
- 280-471
- 280-472
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 709-153
- 709-167
- 780-452
- 780-453
- 780-454
- 780-455
- 780-456
- 780-457
- 780-458
- 793-501
- 793-501/000-002
- 793-501/000-005
- 793-501/000-006
- 793-501/000-007
- 793-501/000-012
- 793-501/000-017
- Level 1 category: Electrical components
- Level 2 category: Terminal blocks
- Product title: Feed-through/thru terminal block - 1-deck/level - Wago
| Main function | Terminal |
|---|---|
| Product series / family name | 280 series |
| Poles | 1P |
| Rated current | 20A < In ≤ 25A |
| Connection capacity | 4-wires (2+2) |
| Connection type (electrical) | Terminals (Spring) |
| Cross-section (mm2) | 0.08mm2, 2.5mm2 |
| Cross-section (AWG) | 12 AWG, 13 AWG, 14 AWG, 15 AWG, 16 AWG, 17 AWG, 18 AWG, 19 AWG, 20 AWG, 21 AWG, 22 AWG, 23 AWG, 24 AWG, 25 AWG, 26 AWG, 27 AWG, 28 AWG |
| Mounting mode | DIN rail, DIN rail (NS 35/7.5) |
| Dimensions (mm) | W5...5.2mm |
| Type - Conductor insertion and removal | with tool |
| Type - Decks | 1 |
| Type - Terminal | feed-through |
| Type - Option | ATEX compliant, special version (with lateral marking slots) |
Write Your Own Review