Wago - 280-815/281-411
$9.75
Wago - 280-815/281-411 is available to buy in increments of 1
Overview
Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
- Connection data - Number of levels:1
- Connection data - Connection 1 - Actuation type:Operating tool
- Connection data - Connection 1 - Wiring direction:Front-entry wiring
- Mechanical Data - Design:horizontal type
- Connection data - Total number of potentials:1
- Electrical data - Ratings per IEC/EN - Rated current:0.5A
- Material data - Color:gray
- Electrical data - General information - Reverse voltage:1,000V
- Electrical data - General information - Nominal voltage:250V
- Connection data - Connection 1 - Connection technology:CAGE CLAMP(R)
- Connection data - Connection 1 - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Connection 1 - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Physical data - Width:5 mm / 0.197 inches
- Material data - Note (material data):
Information on material specifications can be found here - Material data - Insulation material:Polyamide (PA66)
- Connection data - Connection 1 - Connectable conductor materials:
- Copper
- Aluminum
- Connection data - Connection 1 - Connectable conductor materials (note):Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO “Alu-Plus" Contact Paste 249-130 is used for termination.
“Alu-Plus" Contact Paste Advantages:- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
Using terminal blocks with CAGE CLAMP(R) Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus" Contact Paste.
It is also possible to apply WAGO “Alu-Plus" additionally on the whole surface of the aluminum conductor before termination.
Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm2 = 16 A
4 mm2 = 22 A - Environmental requirements - Processing temperature:-35 ... +85 °C
- Environmental requirements - Continuous operating temperature:-60 ... +105 °C
- Commercial data - GTIN:4050820000000
- Commercial data - ETIM 8.0:EC000903
- Commercial data - ETIM 7.0:EC000903
- Commercial data - eClass 10.0:27-14-11-27
- Commercial data - eClass 9.0:27-14-11-27
- Commercial data - Customs tariff number:85369010000
- sku_code:280-815/281-411
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- Electrical data - Ratings per IEC/EN - Ratings per:IEC/EN 60947-7-1
- Material data - Flammability class per UL94:V0
- Material data - Material group:I
- Environmental Product Compliance - RoHS Exemption:
- 7(a)
- 7(c)-I
- Commercial data - Country of origin:CN
- Mechanical Data - Marking level:Center marking
- ACCESSORIES_Markingaccessories:
- 2009-115
- 249-105
- 793-501
- 793-5501
- ACCESSORIES_Tools:
- 210-657
- 210-658
- 210-720
- ACCESSORIES_Ferrule:
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- ACCESSORIES_Assembling:
- 209-106
- 249-116
- 709-153
- 709-167
- ACCESSORIES_Check:
- 249-141
- 249-142
- 249-143
- ACCESSORIES_Jumper:
- 210-103
- 210-123
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 709-110
- 709-111
- 709-112
- ACCESSORIES_Insulationstop:
- 280-470
- 280-471
- 280-472
- mandatory_ACCESSORIES_Endplate:
- 280-314
- 280-315
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ProtectiveWarningMarker:280-415
- manufacturer_description:Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm2; CAGE CLAMP(R); 2,50 mm2; gray
- picture_filename_1:1024-02000006000073ba000100b6-DE.jpg
- picture_zoom_filename_1:2000-02000006000073ba000100b6-DE.jpg
- Material data - Weight:9.4g
- Material data - Fire load:0.16MJ
- picture_filename_2:1024-0200000600006dba000100b6-DE.jpg
- picture_zoom_filename_2:2000-0200000600006dba000100b6-DE.jpg
- Physical data - Height:75 mm / 2.953 inches
- Commercial data - Product Group:1 (Rail Mounted Terminal Blocks)
- picture_filename_3:1024-02000007000391ac000100b6-DE.jpg
- picture_zoom_filename_3:2000-02000007000391ac000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:28 mm / 1.102 inches
- Primary brand: Wago
- Functions: Component feed-through/thru terminal block
- Design:
- 1-deck/level
- diode (1N4007; anode on right side)
- Poles: 1 feed-through pole (1P)
- Rated current: (IEC) 0.5A
- Color: Gray
- Connection capacity: 4-wires (2 clamps + 2 clamps) (2+2)
- Rated voltage (AC): 250Vac (diode)
- Connection type: CAGE CLAMP spring connections
- Cross-section:
- for 0.08mm2...2.5mm2 fine stranded or solid conductors
- for #28AWG...#14AWG fine stranded or solid conductors
- Mounting mode: DIN-35 rail (35 x 15 / 35 x 7.5)
- Dimensions: H75mm x W5mm x D28mm
- Net Width (mm): 5mm
- Material: Polyamide (PA) 66
- GTIN code: 4050820000000
- ETIM code: EC000903
- eClass code: 27-14-11-27
- Customs Tariff Number: 85369010000
- Order code / Manufacturer SKU: 280-815/281-411
- Manufacturer product status: Commercialized
- Equivalent to: 280815000000
- EAN code: 4050820000000
- Compliant with standard(s):
- RoHS compliant with exemption (7(a) / 7(c)-I)
- V-0 flammability rating
- Location of origin: China
- Cross-sells with:
- 280-314
- 280-315
- 2009-115
- 209-106
- 210-103
- 210-112
- 210-113
- 210-114
- 210-115
- 210-123
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 210-657
- 210-658
- 210-720
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- 249-105
- 249-116
- 249-141
- 249-142
- 249-143
- 280-415
- 280-470
- 280-471
- 280-472
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 709-110
- 709-111
- 709-112
- 709-153
- 709-167
- 793-501
- 793-5501
- Level 1 category: Electrical components
- Level 2 category: Terminal blocks
- Product title: Component feed-through/thru terminal block - 1-deck/level - Wago
| Main function | Terminal |
|---|---|
| Product series / family name | 280 series |
| Poles | 1P |
| Rated current | In ≤ 1A |
| Connection capacity | 4-wires (2+2) |
| Connection type (electrical) | Terminals (Spring) |
| Cross-section (mm2) | 0.08mm2, 2.5mm2 |
| Cross-section (AWG) | 14 AWG, 15 AWG, 16 AWG, 17 AWG, 18 AWG, 19 AWG, 20 AWG, 21 AWG, 22 AWG, 23 AWG, 24 AWG, 25 AWG, 26 AWG, 27 AWG, 28 AWG |
| Mounting mode | DIN rail, DIN rail (NS 35/7.5) |
| Dimensions (mm) | W5...5.2mm |
| Type - Conductor insertion and removal | with tool |
| Type - Decks | 1 |
| Type - Terminal | feed-through |
| Type - Option | with diode(s), with diode(s) (1N4007; anode on right side) |
Write Your Own Review