Wago - 280-560
$6.58
Wago - 280-560 is available to buy in increments of 1
Overview
3-conductor sensor terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
- Connection data - Number of levels:3
- Connection data - Connection 1 - Actuation type:Operating tool
- Connection data - Connection 1 - Wiring direction:Front-entry wiring
- Mechanical Data - Design:angled
- Connection data - Total number of potentials:3
- Electrical data - Ratings per IEC/EN - Rated current:20A
- Electrical data - Power Loss - Rated current In for specified power loss:20A
- Material data - Color:gray
- Electrical data - Ratings per IEC/EN - Nominal voltage (III/3):400V
- Electrical data - Ratings per IEC/EN - Rated impulse voltage (III/3):6kV
- Connection data - Connection 1 - Connection technology:CAGE CLAMP(R)
- Connection data - Connection 1 - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Connection 1 - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Connection 1 - Note (conductor cross-section):12 AWG: THHN, THWN
- Mechanical Data - Mounting type:DIN-35 rail
- Physical data - Width:5 mm / 0.197 inches
- Material data - Note (material data):
Information on material specifications can be found here - Material data - Insulation material:Polyamide (PA66)
- Connection data - Connection 1 - Connectable conductor materials:
- Copper
- Aluminum
- Connection data - Connection 1 - Connectable conductor materials (note):Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO “Alu-Plus" Contact Paste 249-130 is used for termination.
“Alu-Plus" Contact Paste Advantages:- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
Using terminal blocks with CAGE CLAMP(R) Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus" Contact Paste.
It is also possible to apply WAGO “Alu-Plus" additionally on the whole surface of the aluminum conductor before termination.
Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm2 = 16 A
4 mm2 = 22 A - Environmental requirements - Processing temperature:-35 ... +85 °C
- Environmental requirements - Continuous operating temperature:-60 ... +105 °C
- Commercial data - GTIN:4044920000000
- Commercial data - ETIM 8.0:EC000900
- Commercial data - ETIM 7.0:EC000900
- Commercial data - eClass 10.0:27-14-11-28
- Commercial data - eClass 9.0:27-14-11-28
- Commercial data - Customs tariff number:85369010000
- Electrical data - Power Loss - Power loss, per pole (potential):0.532W
- sku_code:280-560
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_General approvals:
- CCA - DEKRA Certification B.V. - EN 60947 - certificate 2160584.53
- CSA - DEKRA Certification B.V. - C22.2 - certificate 1536071
- UR - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Material data - Flammability class per UL94:V0
- Material data - Material group:I
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - EN 60947 - certificate 20-HG1941090-PDA
- DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- Commercial data - Country of origin:DE
- Mechanical Data - Marking level:Center marking
- Electrical data - Ratings per IEC/EN - Legend (ratings):(III / 3) Overvoltage category III / Pollution degree 3
- ACCESSORIES_Markingaccessories:
- 2009-115
- 2009-115/000-002
- 2009-115/000-006
- 2009-115/000-007
- 2009-115/000-012
- 2009-115/000-017
- 2009-115/000-023
- 2009-115/000-024
- 793-501
- 793-501/000-002
- 793-501/000-005
- 793-501/000-006
- 793-501/000-007
- 793-501/000-012
- 793-501/000-017
- 793-501/000-023
- 793-501/000-024
- 793-5501
- 793-5501/000-002
- 793-5501/000-005
- ACCESSORIES_Tools:
- 210-657
- 210-658
- 210-720
- ACCESSORIES_Ferrule:
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- ACCESSORIES_Assembling:
- 249-116
- 709-154
- 709-168
- ACCESSORIES_Check:209-170
- ACCESSORIES_Jumper:
- 210-103
- 210-123
- 280-402
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 709-110
- 709-111
- 709-112
- 780-452
- 780-453
- 780-454
- 780-455
- 780-456
- 780-457
- 780-458
- ACCESSORIES_Insulationstop:
- 280-470
- 280-471
- 280-472
- mandatory_ACCESSORIES_Endplate:
- 280-319
- 280-321
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ProtectiveWarningMarker:280-415
- ACCESSORIES_Push_Intypewirejumper:
- 249-123
- 249-125
- 249-126
- 249-127
- manufacturer_description:3-conductor sensor terminal block; with colored conductor entries; 2.5 mm2; CAGE CLAMP(R); 2,50 mm2; gray
- picture_filename_1:1024-020000040003d8d4000100b6-DE.jpg
- picture_zoom_filename_1:2000-020000040003d8d4000100b6-DE.jpg
- Material data - Weight:10.6g
- Material data - Fire load:0.264MJ
- picture_filename_2:1024-020000040003d22f000100b6-DE.jpg
- picture_zoom_filename_2:2000-020000040003d22f000100b6-DE.jpg
- Physical data - Height:80 mm / 3.15 inches
- Commercial data - Product Group:1 (Rail Mounted Terminal Blocks)
- picture_filename_3:1024-0200000600020f64000100b6-DE.jpg
- picture_zoom_filename_3:2000-0200000600020f64000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:55.5 mm / 2.185 inches
- Electrical data - Power Loss - Resistance value for specified, current-dependent power loss:0.001Ω
- Primary brand: Wago
- Functions: Sensr. terminal block
- Design:
- 3-decks/levels (triple-deck)
- colored wire entry
- Poles: 3-conductors
- Rated current:
- (IEC) 20A
- (UL) 15A
- (CSA) 15A
- Color: Gray
- Connection capacity: 4-wires (4 clamps)
- Rated operating voltage (Ue):
- (IEC) 400V
- (UL) 300V
- (CSA) 300V
- Rated impulse voltage (Uimp): (IEC) 6kV
- Connection type: CAGE CLAMP spring connections
- Cross-section:
- for 0.08mm2...2.5mm2 fine stranded or solid conductors
- for #28AWG...#12AWG fine stranded or solid conductors
- Mounting mode: DIN-35 rail
- Dimensions: H80mm x W5mm x D55.5mm
- Net Width (mm): 5mm
- Material: Polyamide (PA) 66
- GTIN code: 4044920000000
- ETIM code: EC000900
- eClass code: 27-14-11-28
- Customs Tariff Number: 85369010000
- Order code / Manufacturer SKU: 280-560
- Manufacturer product status: Commercialized
- Equivalent to: 280560
- EAN code: 4044920000000
- Compliant with standard(s):
- General approvals
- - CCA - DEKRA Certification B.V. - EN 60947 - certificate 2160584.53
- - CSA - DEKRA Certification B.V. - C22.2 - certificate 1536071
- - UR - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - EN 60947 - certificate 20-HG1941090-PDA
- - DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- RoHS compliant
- V-0 flammability rating
- Location of origin: Germany
- Cross-sells with:
- 280-319
- 280-321
- 2009-115
- 2009-115/000-002
- 2009-115/000-006
- 2009-115/000-007
- 2009-115/000-012
- 2009-115/000-017
- 2009-115/000-023
- 2009-115/000-024
- 209-170
- 210-103
- 210-112
- 210-113
- 210-114
- 210-115
- 210-123
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 210-657
- 210-658
- 210-720
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- 249-116
- 249-123
- 249-125
- 249-126
- 249-127
- 280-402
- 280-415
- 280-470
- 280-471
- 280-472
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 709-110
- 709-111
- 709-112
- 709-154
- 709-168
- 780-452
- 780-453
- 780-454
- 780-455
- 780-456
- 780-457
- 780-458
- 793-501
- 793-501/000-002
- 793-501/000-005
- 793-501/000-006
- 793-501/000-007
- 793-501/000-012
- 793-501/000-017
- 793-501/000-023
- 793-501/000-024
- 793-5501
- 793-5501/000-002
- 793-5501/000-005
- Level 1 category: Electrical components
- Level 2 category: Terminal blocks
- Product title: Sensr. terminal block - 3-decks/levels (triple-deck) - Wago
| Main function | Terminal |
|---|---|
| Product series / family name | 280 series |
| Poles | 3P |
| Rated current | 15A < In ≤ 20A |
| Connection capacity | 4-wires |
| Connection type (electrical) | Terminals (Spring) |
| Cross-section (mm2) | 0.08mm2, 2.5mm2 |
| Cross-section (AWG) | 12 AWG, 13 AWG, 14 AWG, 15 AWG, 16 AWG, 17 AWG, 18 AWG, 19 AWG, 20 AWG, 21 AWG, 22 AWG, 23 AWG, 24 AWG, 25 AWG, 26 AWG, 27 AWG, 28 AWG |
| Mounting mode | DIN rail |
| Dimensions (mm) | W5...5.2mm |
| Type - Conductor insertion and removal | with tool |
| Type - Decks | 3 |
| Type - Terminal | for sensors |
| Type - Option | Standard (No options) |
Write Your Own Review