Wago - 280-558
$17.12
Wago - 280-558 is available to buy in increments of 1
Overview
Triple-deck terminal block; Shield/through/through terminal block; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; white/blue/gray
- Connection data - Number of levels:3
- Connection data - Connection 1 - Actuation type:Operating tool
- Connection data - Connection 1 - Wiring direction:Front-entry wiring
- Mechanical Data - Design:horizontal type
- Connection data - Total number of potentials:3
- Electrical data - Ratings per IEC/EN - Rated current:20A
- Electrical data - Power Loss - Rated current In for specified power loss:20A
- Material data - Color:white/blue/gray
- Electrical data - Ratings per IEC/EN - Nominal voltage (III/3):500V
- Electrical data - Ratings per IEC/EN - Rated impulse voltage (III/3):6kV
- Connection data - Connection 1 - Connection technology:CAGE CLAMP(R)
- Connection data - Connection 1 - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Connection 1 - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Connection 1 - Note (conductor cross-section):12 AWG: THHN, THWN
- Mechanical Data - Mounting type:DIN-35 rail
- Physical data - Width:5 mm / 0.197 inches
- Material data - Note (material data):
Information on material specifications can be found here - Material data - Insulation material:Polyamide (PA66)
- Connection data - Connection 1 - Connectable conductor materials:
- Copper
- Aluminum
- Connection data - Connection 1 - Connectable conductor materials (note):Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO “Alu-Plus" Contact Paste 249-130 is used for termination.
“Alu-Plus" Contact Paste Advantages:- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
Using terminal blocks with CAGE CLAMP(R) Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus" Contact Paste.
It is also possible to apply WAGO “Alu-Plus" additionally on the whole surface of the aluminum conductor before termination.
Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm2 = 16 A
4 mm2 = 22 A - Environmental requirements - Processing temperature:-35 ... +85 °C
- Environmental requirements - Continuous operating temperature:-60 ... +105 °C
- Commercial data - GTIN:4045450000000
- Commercial data - ETIM 8.0:EC000901
- Commercial data - ETIM 7.0:EC000901
- Commercial data - eClass 10.0:27-14-11-41
- Commercial data - eClass 9.0:27-14-11-41
- Commercial data - Customs tariff number:85369010000
- Electrical data - Power Loss - Power loss, per pole (potential):1.596W
- sku_code:280-558
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:
- CCA - DEKRA Certification B.V. - EN 60947 - certificate 2157201.01
- CSA - DEKRA Certification B.V. - C22.2 - certificate 1536071
- UR - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Electrical data - Ratings per IEC/EN - Ratings per:IEC/EN 60947-7-1
- Material data - Flammability class per UL94:V0
- Material data - Material group:I
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - EN 60947 - certificate 20-HG1941090-PDA
- BV - Bureau Veritas S.A. - EN 60947 - certificate 07436/F0 BV
- DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- LR - Lloyds Register - EN 60947 - certificate 91/20112 (E9)
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- Commercial data - Country of origin:DE
- Mechanical Data - Marking level:Center marking
- Electrical data - Ratings per IEC/EN - Legend (ratings):(III / 3) Overvoltage category III / Pollution degree 3
- ACCESSORIES_Markingaccessories:
- 2009-115
- 793-501
- 793-5501
- ACCESSORIES_Tools:
- 210-657
- 210-658
- 210-720
- ACCESSORIES_Ferrule:
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- ACCESSORIES_Assembling:
- 209-106
- 249-116
- 709-154
- 709-168
- ACCESSORIES_Check:
- 249-141
- 249-142
- ACCESSORIES_Jumper:
- 210-103
- 210-123
- 280-402
- 280-409
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 281-421
- 709-110
- 709-111
- 709-112
- 780-452
- 780-453
- 780-454
- 780-455
- 780-456
- 780-457
- ACCESSORIES_Insulationstop:
- 280-470
- 280-471
- 280-472
- mandatory_ACCESSORIES_Endplate:
- 280-303
- 280-304
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ProtectiveWarningMarker:280-415
- ACCESSORIES_Push_Intypewirejumper:
- 249-123
- 249-125
- 249-126
- 249-127
- manufacturer_description:Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm2; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP(R); 2,50 mm2; white/blue/gray
- picture_filename_1:1024-0200000a000155f3000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200000a000155f3000100b6-DE.jpg
- Material data - Weight:22g
- Material data - Fire load:0.313MJ
- picture_filename_2:1024-0200000a00015950000100b6-DE.jpg
- picture_zoom_filename_2:2000-0200000a00015950000100b6-DE.jpg
- Physical data - Height:103 mm / 4.055 inches
- Commercial data - Product Group:1 (Rail Mounted Terminal Blocks)
- Physical data - Depth from upper-edge of DIN-rail:76.5 mm / 3.012 inches
- Electrical data - Power Loss - Resistance value for specified, current-dependent power loss:0.001Ω
- Primary brand: Wago
- Functions: Feed-through/thru + neutral-through + shield terminal block
- Design:
- marker carrier
- 3-decks/levels (triple-deck)
- Poles: 1 feed-through pole + neutral-through + shield-through (1P+N+S)
- Rated current: (IEC) 20A
- Color: White / Blue / Gray
- Connection capacity: 6-wires (3 clamps + 3 clamps) (3+3)
- Rated operating voltage (Ue): (IEC) 500V
- Rated impulse voltage (Uimp): (IEC) 6kV
- Connection type: CAGE CLAMP spring connections
- Cross-section:
- for 0.08mm2...2.5mm2 fine stranded or solid conductors
- for #28AWG...#12AWG fine stranded or solid conductors
- Mounting mode: DIN-35 rail (35 x 15 / 35 x 7.5)
- Dimensions: H103mm x W5mm x D76.5mm
- Net Width (mm): 5mm
- Material: Polyamide (PA) 66
- GTIN code: 4045450000000
- ETIM code: EC000901
- eClass code: 27-14-11-41
- Customs Tariff Number: 85369010000
- Order code / Manufacturer SKU: 280-558
- Manufacturer product status: Commercialized
- Equivalent to: 280558
- EAN code: 4045450000000
- Compliant with standard(s):
- General approvals
- - CCA - DEKRA Certification B.V. - EN 60947 - certificate 2157201.01
- - CSA - DEKRA Certification B.V. - C22.2 - certificate 1536071
- - UR - Underwriters Laboratories Inc. - UL 1059 - certificate E45172
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - EN 60947 - certificate 20-HG1941090-PDA
- - BV - Bureau Veritas S.A. - EN 60947 - certificate 07436/F0 BV
- - DNV GL - Det Norske Veritas Germanischer Lloyd - certificate TAE00001V2
- - LR - Lloyds Register - EN 60947 - certificate 91/20112 (E9)
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- V-0 flammability rating
- Location of origin: Germany
- Cross-sells with:
- 280-303
- 280-304
- 2009-115
- 209-106
- 210-103
- 210-112
- 210-113
- 210-114
- 210-115
- 210-123
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 210-657
- 210-658
- 210-720
- 216-101
- 216-102
- 216-103
- 216-104
- 216-201
- 216-202
- 216-203
- 216-204
- 216-301
- 216-302
- 249-116
- 249-123
- 249-125
- 249-126
- 249-127
- 249-141
- 249-142
- 280-402
- 280-409
- 280-415
- 280-470
- 280-471
- 280-472
- 280-482
- 280-483
- 280-484
- 280-485
- 280-490
- 280-492
- 281-421
- 709-110
- 709-111
- 709-112
- 709-154
- 709-168
- 780-452
- 780-453
- 780-454
- 780-455
- 780-456
- 780-457
- 793-501
- 793-5501
- Level 1 category: Electrical components
- Level 2 category: Terminal blocks
- Product title: Feed-through/thru + neutral-through + shield terminal block - 3-decks/levels (triple-deck) - Wago
| Main function | Terminal |
|---|---|
| Product series / family name | 280 series |
| Poles | 1P+N+S |
| Rated current | 15A < In ≤ 20A |
| Connection capacity | 6-wires (3+3) |
| Connection type (electrical) | Terminals (Spring) |
| Cross-section (mm2) | 0.08mm2, 2.5mm2 |
| Cross-section (AWG) | 12 AWG, 13 AWG, 14 AWG, 15 AWG, 16 AWG, 17 AWG, 18 AWG, 19 AWG, 20 AWG, 21 AWG, 22 AWG, 23 AWG, 24 AWG, 25 AWG, 26 AWG, 27 AWG, 28 AWG |
| Mounting mode | DIN rail, DIN rail (NS 35/7.5) |
| Dimensions (mm) | W5...5.2mm |
| Type - Conductor insertion and removal | with tool |
| Type - Decks | 3 |
| Type - Terminal | feed-through, shield-through |
| Type - Option | special version (with marker carrier) |
Write Your Own Review