Wago - 750-626/020-002
$165.00
Wago - 750-626/020-002 is available to buy in increments of 1
Overview
Supply Filter; 24 VDC; Higher isolation; Ground Fault Diagnostics; light gray
- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A, C) green: system power supply status, field power supply status; LED (G) red: ground fault
- Technical data - Number of outgoing power jumper contacts:2
- Technical data - Data width:8-bit input; 8-bit output
- Technical data - Supply voltage (system):24 VDC (-25 ... +30 %)
- Technical data - Supply voltage (field):24 VDC, SELV (-25 ... +30 %); Via power jumper contacts (power supply via CAGE CLAMP(R) connection; transmission (supply voltage field side only) via spring contact)
- Technical data - Current carrying capacity (power jumper contacts):10A
- Technical data - Isolation:300 VDC (limited by a transient protection device) system/field
- Connection data - Connection type 1:System/field supply
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Signal type:Voltage
- Technical data - Signal type (voltage):24 VDC
- Physical data - Width:12 mm / 0.472 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):0 ... +55 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Technical data - Current consumption (5 V system supply):29mA
- Technical data - Current consumption, field supply (module with no external load):16mA
- Commercial data - ETIM 8.0:EC001600
- Commercial data - ETIM 7.0:EC001600
- Commercial data - eClass 10.0:27-24-26-10
- Commercial data - eClass 9.0:27-24-26-10
- sku_code:750-626/020-002
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - certificate E175199
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - certificate 22-2219060
- BSH - Bundesamt fuer Seeschifffahrt und Hydrographie - certificate 1104
- BV - Bureau Veritas S.A. - Rules for class. of Steel Ships - certificate 66711/A0
- DNV - DNV GL SE - DNV-CG-0339 / Aug.2021 - certificate TAA0000194
- KR - Korean Register of Shipping - certificate KR HMB05880-AC001
- LR - Lloyds Register EMEA - certificate LR22180952TA
- PRS - Polski Rejestr Statkow - certificate TE/1101/880590/23
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- approvals_Approvals for hazardous areas:UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- Environmental requirements - Exposure to pollutants:Per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- manufacturer_description:Supply Filter; 24 VDC; Higher isolation; Ground Fault Diagnostics
- picture_filename_1:1024-020000320000daaa000100b6-DE.jpg
- picture_zoom_filename_1:2000-020000320000daaa000100b6-DE.jpg
- Material data - Weight:52.1g
- Material data - Fire load:0.967MJ
- picture_filename_2:1024-0200003100013300000100b6-DE.jpg
- picture_zoom_filename_2:2000-0200003100013300000100b6-DE.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:The WAGO I/O System 750 can also be used in marine applications and onshore/offshore installations (e.g., platforms, loading facilities). This is possible via certification under the standards of leading agencies such as Germanischer Lloyd and Lloyd's Register. This filter module ensures proper (certified) system operation. The module protects against high-energy disturbances on DC supply lines due to switching overvoltages caused by inductive loads. It contains a filter for the system supply and transient protection for both system and field supply. It is streamlined for use in systems with insulation monitoring and also offers the possibility of a ground fault test.
Indicators:
- LED (green): Power supply is available
- LED (red): Ground fault
Ground fault diagnostics (response values):- Pre-alarm 50 kΩ (Â+/-15 %)
- Main alarm 25 kΩ (Â+/-15 %)
- Hysteresis (typ.) 25 ... 30 %
- Response time ≤ 5 s (typ. 2.5 s)
- Internal resistance DC (test circuit) >10 MΩ (test inactive), >90 kΩ (test active)
- Test current ≤180 μA (RF=0 Ω)
- Permissible system leakage capacitance ≤ 2 µF
- Physical data - Depth:69.8 mm / 2.748 inches
- picture_filename_3:1024-1276733-EN.jpg
- picture_zoom_filename_3:2000-1276733-EN.jpg
- Physical data - Depth from upper-edge of DIN-rail:62.6 mm / 2.465 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3, marine applications
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2, marine applications
- Primary brand: Wago
- Functions: Supply filter
- Design:
- higher isolation
- ground fault diagnostic
- Supply voltage (DC): 24Vdc
- Rated current: 10A
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Dimensions: H100mm x W12mm x D69.8mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: 0°C...+55°C
- Ambient air temperature for storage: -40°C...+85°C
- Humidity: 95% relative humidity (RH; non-condensing)
- ETIM code: EC001600
- eClass code: 27-24-26-10
- Order code / Manufacturer SKU: 750-626/020-002
- Manufacturer product status: Commercialized
- Equivalent to: 750626000000
- EAN code: 4055140000000
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- - marine applications
- EMC emission of interference
- - EN 61000-6-3
- - marine applications
- General approvals
- - UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - certificate E175199
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - certificate 22-2219060
- - BSH - Bundesamt fuer Seeschifffahrt und Hydrographie - certificate 1104
- - BV - Bureau Veritas S.A. - Rules for class. of Steel Ships - certificate 66711/A0
- - DNV - DNV GL SE - DNV-CG-0339 / Aug.2021 - certificate TAA0000194
- - KR - Korean Register of Shipping - certificate KR HMB05880-AC001
- - LR - Lloyds Register EMEA - certificate LR22180952TA
- - PRS - Polski Rejestr Statkow - certificate TE/1101/880590/23
- Approvals for hazardous areas
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Degree of pollution: 2
- Level 1 category: Electrical components
- Level 2 category: Electrical circuits protection
- Level 3 category: Surge Protection Devices (SPD)
- Product title: Supply filter - Wago
| Main function | Suppressor module |
|---|---|
| Product series / family name | 750 series |
| Supply voltage (DC) | 24Vdc |
| Rated current | 5A < In ≤ 10A |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Degree of protection | IP20 |
| Type - Option | ground fault diagnostic, higher isolation |
Write Your Own Review