Wago - 857-500

$360.40

Wago - 857-500 is available to buy in increments of 1

Overview

Frequency signal conditioner; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC; 6 mm module width

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical data - Configuration - Configuration options:
- DIP switch
- WAGO Interface Configuration Software
- WAGO Interface Configuration App
Environmental requirements - Operating altitude (max.):2000m
Technical data - Power supply - Power supply type:24 VDC
Technical data - Power supply - Nominal supply voltage U_S:DC 24 V
Technical data - Power supply - Supply voltage range:Â+/-30 %
Technical data - Input (sensor type 1) - Measurement range (frequency) 1:0.1 Hz ... 120 kHz
Technical data - Input (sensor type 2) - Measurement range (frequency) 2:0.1 Hz ... 1 kHz
Technical data - Input (sensor type 3) - Measurement range (frequency) 3:0.1 Hz ... 20 kHz
Connection data - Connection technology:Push-in CAGE CLAMP^(R)
Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
Connection data - Fine-stranded conductor:0.34 ... 2.5 mm2 / 22 ... 14 AWG
Mechanical Data - Mounting type:DIN-35 rail
Technical data - Input (sensor type 1) - Coupling:AC/DC (adjustable; AC above 10 Hz)
Technical data - Input (sensor type 1) - Input resistance:10kΩ
Technical data - Input (sensor type 1) - Measurement span 1 (min.):10Hz
Technical data - Input (sensor type 1) - Sensor type 1:
- frequency generator
- NPN/PNP transistor output with pull-up or pull-down resistor
Technical data - Input (sensor type 1) - Signal form:Any
Technical data - Input (sensor type 1) - Signal level:1.5 V; 10 V; 20 V (switchable)
Technical data - Input (sensor type 2) - Hysteresis:0.45mA
Technical data - Input (sensor type 2) - Measurement span 2 (min.):10Hz
Technical data - Input (sensor type 2) - Sensor type 2:NAMUR sensor per DIN EN 50227
Technical data - Input (sensor type 3) - Measurement span 3 (min.):100Hz
Technical data - Input (sensor type 3) - PNP switching voltage:≥ 7.5 V (+ residual voltage U_CE sat)
Technical data - Input (sensor type 3) - Sensor type 3:
- NPN/PNP transistor output without pull-up or pull-down resistor
- mechanical contact (dry contact)
Technical data - Input - Input signal type:
- Frequency generators
- NAMUR sensors
- NPN/PNP transistor outputs
- Mechanical contact (dry contact)
Technical data - Output (analog) - Output signal type:
- Current
- Voltage
Technical data - Output (analog) - Output signal (voltage):0 ... 5 V; 1 ... 5 V; 0 ... 10 V; 2 ... 10 V
Technical data - Measurement error - Temperature coefficient:≤ 0.01 %/K
Technical data - Measurement error - Transmission error (typ.):≤ 0.1 % of upper-range value
Physical data - Width:6 mm / 0.236 inches
Environmental requirements - Ambient temperature (operation):-25 ... +70 °C
Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
Environmental requirements - Relative humidity:5 ... 95 % (no condensation permissible)
Technical data - Signal processing - Conversion time:Peak-time measurement method (> 400 Hz): < 20 ms; Pulse time measurement method (< 400 Hz): < 200 Î¼s + T_{Cycle duration}
Technical data - Power supply - Current consumption at nominal supply voltage:≤ 40 mA
Commercial data - GTIN:4050820000000
Commercial data - ETIM 8.0:EC002918
Commercial data - ETIM 7.0:EC002918
Commercial data - eClass 10.0:27-21-01-28
Commercial data - eClass 9.0:27-21-01-28
Commercial data - Customs tariff number:85437090300
sku_code:857-500
Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
approvals_General approvals:UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.4
approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
approvals_Approvals for hazardous areas:
- ATEX - TUEV Nord Cert GmbH - EN 60079-0 - certificate TUEV14ATEX112692X (II 3G Ex ec IIC T4 Gc)
- CCC - CNEX - CNCA-C23-01 - certificate 2020312310000210 (Ex ec IIC T4 Gc)
- IECEx - TUEV Nord Cert GmbH - certificate IECEX TUN14.0030X
- UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate WAGO22UKEX004X
- UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - ANSI/ISA 12.12.01 - certificate E198726
Standards and specifications - Standards/specifications:
- EN 61373
- EN 61373
Standards and specifications - Conformity marking:CE
Standards and specifications - EMC emission of interference:EN 61000-6-4
Standards and specifications - EMC immunity to interference:EN 61000-6-2
Commercial data - Country of origin:DE
ACCESSORIES_Markingaccessories:
- 2009-110
- 2009-115
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
ACCESSORIES_Tools:210-720
ACCESSORIES_Assembling:
- 249-116
- 249-117
- 249-197
ACCESSORIES_Jumper:
- 281-482
- 859-402
- 859-402/000-005
- 859-402/000-006
- 859-402/000-029
- 859-403
- 859-403/000-005
- 859-403/000-006
- 859-403/000-029
- 859-404
- 859-404/000-005
- 859-404/000-006
- 859-404/000-029
- 859-405
- 859-405/000-005
- 859-405/000-006
- 859-405/000-029
- 859-406/000-005
- 859-406/000-006
- 859-406/000-029
ACCESSORIES_WiringAndConnectors:750-923/000-001
ACCESSORIES_Clamps:857-979
ACCESSORIES_Communication:
- 750-921
- 750-923
ACCESSORIES_TransferModule:857-980
ACCESSORIES_PowerSupply:787-2852
manufacturer_description:Frequency signal conditioner; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC; 6 mm module width
picture_filename_1:1024-0200001100008b81000100b6-DE.jpg
picture_zoom_filename_1:2000-0200001100008b81000100b6-DE.jpg
Material data - Weight:36.2g
Material data - Fire load:0.418MJ
picture_filename_2:1024-02000010000218bf000100b6-DE.jpg
picture_zoom_filename_2:2000-02000010000218bf000100b6-DE.jpg
Physical data - Height:94 mm / 3.701 inches
manufacturer_detailed_description:
Short description:
WAGO's frequency signal conditioner collects 0.1â€"120 kHz signals from NAMUR, NPN or PNP sensors and converts them into a standard analog signal.
Features:
- PC configuration interface
- Signal acquisition from NAMUR, NPN or PNP sensors
- Calibrated measurement range switching
- 3-way electrical isolation with 2.5 kV test voltage
Commercial data - Product Group:6 (INTERFACE ELECTRONIC)
picture_filename_3:1024-0200000200015033000300b6-EN.jpg
picture_zoom_filename_3:2000-0200000200015033000300b6-EN.jpg
picture_filename_4:1024-02000009000281c9000200b6-EN.jpg
picture_zoom_filename_4:2000-02000009000281c9000200b6-EN.jpg
Physical data - Depth from upper-edge of DIN-rail:97.8 mm / 3.85 inches
picture_filename_5:1024-020000120000e88d000200b6-EN.jpg
picture_zoom_filename_5:2000-020000120000e88d000200b6-EN.jpg
Safety and protection - Protection type:IP20
Primary brand: Wago
Functions:
- Frequency signal conditioner
- Clipping circuit
Design:
- DIP switch
- interface configuration via software / app
Supply voltage (DC): 16.8-26.4Vdc (24Vdc nom.)
Connection type: Push-in CAGE CLAMP spring connections
Mounting mode: DIN-35 rail
Digital inputs:
- 1 x digital input (NPN / PNP)
- 1 x digital input (NAMUR)
Analog outputs: 1 x analog output (0-10mA / 2-10mA / 0-20mA / 4-20mA / 0-5Vdc / 1-5Vdc / 0-10Vdc / 2-10Vdc)
Dimensions: H94mm x W6mm x D97.8mm
Net Width (mm): 6mm
Ambient air temperature for operation: -25°C...+70°C
Ambient air temperature for storage: -40°C...+85°C
Humidity: 5-95% relative humidity (RH; non-condensing)
Current consumption: 40mA (24Vdc; at nominal load)
GTIN code: 4050820000000
ETIM code: EC002918
eClass code: 27-21-01-28
Customs Tariff Number: 85437090300
Order code / Manufacturer SKU: 857-500
Manufacturer product status: Commercialized
Equivalent to: 857500
EAN code: 4050820000000
Compliant with standard(s):
- CE
- EN 61373
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-4
- General approvals
- - UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.4
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for hazardous areas
- - ATEX - TUV Nord Cert GmbH - EN 60079-0 - certificate TUV14ATEX112692X (II 3G Ex ec IIC T4 Gc)
- - CCC - CNEX - CNCA-C23-01 - certificate 2020312310000210 (Ex ec IIC T4 Gc)
- - IECEx - TUV Nord Cert GmbH - certificate IECEX TUN14.0030X
- - UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate WAGO22UKEX004X
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - ANSI/ISA 12.12.01 - certificate E198726
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
Location of origin: Germany
Cross-sells with:
- 2009-110
- 2009-115
- 210-720
- 249-116
- 249-117
- 249-197
- 281-482
- 750-921
- 750-923
- 750-923/000-001
- 787-2852
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- 857-979
- 857-980
- 859-402
- 859-402/000-005
- 859-402/000-006
- 859-402/000-029
- 859-403
- 859-403/000-005
- 859-403/000-006
- 859-403/000-029
- 859-404
- 859-404/000-005
- 859-404/000-006
- 859-404/000-029
- 859-405
- 859-405/000-005
- 859-405/000-006
- 859-405/000-029
- 859-406/000-005
- 859-406/000-006
- 859-406/000-029
Level 1 category: Cabling systems
Level 2 category: Connectors & Inserts
Product title: Frequency signal conditioner - DIP switch - Wago

More Information

More Information
Main function	Transducer (Analog)
Product series / family name	857 series
Supply voltage (DC)	24Vdc
Connection type (electrical)	Terminals (Spring)
Mounting mode	DIN rail
Digital inputs type	NPN, PNP
Analog outputs type	Current, Voltage
Degree of protection	IP20
Type - Option	Standard (No options)

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account