Wago - 857-815
$381.70
Wago - 857-815 is available to buy in increments of 1
Overview
Temperature signal conditioner for RTD sensors; Current output signal; Power via output; 6 mm module width
- Technical data - Configuration - Configuration options:DIP switch
- Environmental requirements - Operating altitude (max.):2000m
- Safety and protection - Insulation coordination - Insulation type (input/analog output/supply):Reinforced insulation (safe isolation)
- Safety and protection - Insulation coordination (UL) - Insulation type (input/analog output):Reinforced insulation (safe isolation)
- Technical data - Power supply - Power supply type:Loop-powered (via output)
- Technical data - Power supply - Supply voltage:DC 8 ... 30 V (Power is derived from the output circuit.)
- Safety and protection - Rated voltage:300 V; 150 V (UL)
- Connection data - Connection technology:Push-in CAGE CLAMP(R)
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.34 ... 2.5 mm2 / 22 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Technical data - Input - Input signal type:
- Resistance
- Pt sensors
- Resistor
- Technical data - Input (RTD sensors) - Sensor types (RTD):
- Pt100
- Pt200
- Pt500
- Pt1000
- Technical data - Input (RTD sensors) - Temperature measurement range (RTD):-200 ... 850°C
- Technical data - Output (analog) - Output signal type:Current
- Technical data - Measurement error - Temperature coefficient:≤ 0.02 %/K
- Technical data - Measurement error - Transmission error (typ.):≤ 0.1 % at full measurement span
- Technical data - Measurement error - Transmission error for the set measurement range:≤ ((40 K/set measurement range [K]) + 0.1) %
- Technical data - Measurement error - Transmission error (under interference):≤ 5 %
- Physical data - Width:6 mm / 0.236 inches
- Environmental requirements - Ambient temperature (operation):-25 ... +70 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity:5 ... 95 % (no condensation permissible)
- Commercial data - GTIN:4055140000000
- Commercial data - ETIM 8.0:EC002919
- Commercial data - ETIM 7.0:EC002919
- Commercial data - eClass 10.0:27-21-01-29
- Commercial data - eClass 9.0:27-21-01-29
- Commercial data - Customs tariff number:85437090300
- Technical data - Power supply - Power loss (max.) Pl (max.):0.7 W
- sku_code:857-815
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 61010-2-201 - certificate E175199
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- Notes - Safety information:The signal conditioner must only be configured with the DIP switch in the de-energized state.
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- Standards and specifications - Standards/specifications:
- EN 61010-1
- EN 61373
- EN 50121-3-2
- EN 61010-1
- EN 61373
- Standards and specifications - Conformity marking:CE
- Standards and specifications - EMC emission of interference:EN 61000-6-3; EN 61326-1; EN 50121-3-2
- Standards and specifications - EMC immunity to interference:EN 61000-6-2; EN 61326-1; EN 50121-3-2
- Safety and protection - Insulation coordination (UL) - Overvoltage category:II
- Safety and protection - Insulation coordination - Overvoltage category:II
- Commercial data - Country of origin:DE
- Safety and protection - Insulation coordination (UL) - Pollution degree:2
- Safety and protection - Insulation coordination - Pollution degree:2
- ACCESSORIES_Markingaccessories:
- 2009-110
- 2009-115
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- ACCESSORIES_Tools:210-720
- ACCESSORIES_Assembling:
- 249-116
- 249-117
- 249-197
- ACCESSORIES_Jumper:
- 281-482
- 859-402
- 859-402/000-005
- 859-402/000-006
- 859-402/000-029
- 859-403
- 859-403/000-005
- 859-403/000-006
- 859-403/000-029
- 859-404
- 859-404/000-005
- 859-404/000-006
- 859-404/000-029
- 859-405
- 859-405/000-005
- 859-405/000-006
- 859-405/000-029
- 859-406/000-005
- 859-406/000-006
- 859-406/000-029
- ACCESSORIES_Clamps:857-979
- ACCESSORIES_TransferModule:857-980
- ACCESSORIES_PowerSupply:787-2852
- manufacturer_description:Temperature signal conditioner for RTD sensors; Current output signal; Power via output; 6 mm module width
- picture_filename_1:1024-8120137-DE.jpg
- picture_zoom_filename_1:2000-8120137-DE.jpg
- Material data - Weight:38.9g
- Material data - Fire load:0.013MJ
- picture_filename_2:1024-10232654-DE.jpg
- picture_zoom_filename_2:2000-10232654-DE.jpg
- Physical data - Height:94 mm / 3.701 inches
- manufacturer_detailed_description:
Short description:
WAGO's loop-powered RTD temperature signal conditioner records sensors (Pt100, Pt200, Pt500, Pt1000) and resistors up to 4.5 kΩ, converting the temperature signal into a standard analog signal at the output.
The loop-powered RTD temperature signal conditioner provides safe isolation between input and output with 3 kV test voltage per EN 61010-1.
Features:
- No additional supply voltage required
- For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm
- 2-, 3- and 4-wire connection technology
- Calibrated measurement range switching
- Detects a sensor wire break/short circuit
- picture_filename_3:1024-10232657-DE.jpg
- picture_zoom_filename_3:2000-10232657-DE.jpg
- picture_filename_4:1024-10232656-DE.jpg
- picture_zoom_filename_4:2000-10232656-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:97.8 mm / 3.85 inches
- picture_filename_5:1024-10232655-DE.jpg
- picture_zoom_filename_5:2000-10232655-DE.jpg
- Safety and protection - Protection type:IP20
- picture_filename_6:1024-02000022000163f7000100b6-DE.jpg
- picture_zoom_filename_6:2000-02000022000163f7000100b6-DE.jpg
- picture_filename_7:1024-0200000200015033000300b6-EN.jpg
- picture_zoom_filename_7:2000-0200000200015033000300b6-EN.jpg
- picture_filename_8:1024-02000022000298ab000100b6-EN.jpg
- picture_zoom_filename_8:2000-02000022000298ab000100b6-EN.jpg
- picture_filename_9:1024-0200002300021a02000200b6-EN.jpg
- picture_zoom_filename_9:2000-0200002300021a02000200b6-EN.jpg
- Technical data - Input (resistors) - Input range (resistor):0 ... 1 kΩ; 0 ... 4.5 kΩ
- Primary brand: Wago
- Functions: Loop-powered temperature signal conditioner
- Design:
- DIP switch
- loop-powered
- Supply voltage (DC): 8-30Vdc (12Vdc / 24Vdc nom.)
- Connection type: Push-in CAGE CLAMP spring connections
- Mounting mode: DIN-35 rail
- Analog inputs: 1 x analog input (RTD Pt100 / Pt200 / Pt500 / Pt1000 / Resistor; 0-1kΩ / 0-4.5kΩ; 2-wire / 3-wire / 4-wire switchable)
- Analog outputs: 1 x analog output (4-20mA)
- Dimensions: H94mm x W6mm x D97.8mm
- Net Width (mm): 6mm
- Ambient air temperature for operation: -25°C...+70°C
- Ambient air temperature for storage: -40°C...+85°C
- Humidity: 5-95% relative humidity (RH; non-condensing)
- GTIN code: 4055140000000
- ETIM code: EC002919
- eClass code: 27-21-01-29
- Customs Tariff Number: 85437090300
- Order code / Manufacturer SKU: 857-815
- Manufacturer product status: Commercialized
- Equivalent to: 857815
- EAN code: 4055140000000
- Compliant with standard(s):
- CE
- EN 50121-3-2
- EN 61010-1
- EN 61373
- EMC immunity to interference
- - EN 61000-6-2
- - EN 61326-1
- - EN 50121-3-2
- EMC emission of interference
- - EN 61000-6-3
- - EN 61326-1
- - EN 50121-3-2
- General approvals
- - UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 61010-2-201 - certificate E175199
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2009-110
- 2009-115
- 210-720
- 249-116
- 249-117
- 249-197
- 281-482
- 787-2852
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- 857-979
- 857-980
- 859-402
- 859-402/000-005
- 859-402/000-006
- 859-402/000-029
- 859-403
- 859-403/000-005
- 859-403/000-006
- 859-403/000-029
- 859-404
- 859-404/000-005
- 859-404/000-006
- 859-404/000-029
- 859-405
- 859-405/000-005
- 859-405/000-006
- 859-405/000-029
- 859-406/000-005
- 859-406/000-006
- 859-406/000-029
- Level 1 category: Cabling systems
- Level 2 category: Connectors & Inserts
- Product title: Loop-powered temperature signal conditioner - DIP switch - Wago
| Main function | Transducer (Analog) |
|---|---|
| Product series / family name | 857 series |
| Supply voltage (DC) | 12Vdc, 24Vdc |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Analog inputs type | RTD, RTD type Pt500 |
| Analog outputs type | Current |
| Degree of protection | IP20 |
| Type - Option | Standard (No options) |
Write Your Own Review