Wago - 750-495/000-002
$710.80
Wago - 750-495/000-002 is available to buy in increments of 1
Overview
3-Phase Power Measurement; 690 VAC Rogowski coils; light gray
- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A) green: Communication; LED (B-G) red: Error L1, Override in Current Measurement Path (display), Undervoltage in Voltage Measurement Path (display), Error L2, Error L3, Override in Voltage Measurement Path (display); LED (H) yellow: Interchange in Phase Sequence L1-L2-L3
- Technical data - Data width:2 x 128-bit data; 2 x 64-bit control/status
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Limit frequency:15.9kHz
- Technical data - Frequency range (mains frequency):50/60 Hz
- Technical data - Frequency range (harmonics analysis):0 ... 3300 Hz
- Connection data - Connection type 1:Inputs/outputs
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Note (conductor cross-section):Solid conductor: 20 ... 14 AWG (UL); Fine-stranded conductor: 20 ... 16 AWG (UL) These values refer exclusively to the mechanical connection capacity of the clamping points. When the applications/devices are operated in locations covered by UL, only solid conductor with 20 ... 14 AWG and fine-stranded conductor with 20 ... 16 AWG are permitted.
- Mechanical data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:Horizontal left, horizontal top, vertical top and vertical bottom
- Technical data - Signal type:Power measurement
- Technical data - Resolution [bit]:24bits
- Technical data - Number of measurement inputs:7 (3 voltage measurement inputs, 4 differential current measurement inputs)
- Technical data - Current path input resistance (typ.):22 kΩ
- Technical data - Voltage path input resistance (typ.):1429kΩ
- Technical data - Measurement error, deviation (max.) from the upper-range value:0.005
- Technical data - Measurement error (reference temperature):23°C
- Technical data - Reference for measurement error:AC current/voltage
- Physical data - Width:24 mm / 0.945 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):0 ... +55 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Environmental requirements - Vibration resistance:4g per IEC 60068-2-6
- Technical data - Current consumption (5 V system supply):100mA
- Commercial data - ETIM 8.0:
- EC001601
- Commercial data - ETIM 7.0:
- EC001601
- Commercial data - eClass 10.0:27-24-26-05
- Commercial data - eClass 9.0:
- 27-24-26-05
- Commercial data - Customs tariff number:
- 85389099990
- sku_code:750-495/000-002
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-AIM750
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- BSH - Bundesamt fuer Seeschifffahrt und Hydrographie - certificate 1104
- RINA - RINA Germany GmbH - certificate ELE343521XG001
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- approvals_Approvals for hazardous areas:UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - certificate E198726
- Environmental requirements - Exposure to pollutants:per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Commercial data - Country of origin:DE
- Environmental requirements - Pollution degree:2 per EN 60664-1
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_SystemBox:
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- ACCESSORIES_Power_tap:
- 855-8001
- 855-8002
- 855-8003
- 855-8004
- ACCESSORIES_CurrentTransformer:
- 2007-8874
- 2007-8877
- 855-9150/2000-1251
- 855-9150/2000-1751
- 855-9150/2000-701
- 855-9450/2000-1251
- 855-9450/2000-1751
- 855-9450/2000-701
- manufacturer_description:3-Phase Power Measurement; 690 VAC Rogowski coils
- picture_filename_1:1024-020000150000bebe000200b6-DE.jpg
- picture_zoom_filename_1:2000-020000150000bebe000200b6-DE.jpg
- Material data - Weight:98.1g
- Material data - Fire load:2.001MJ
- picture_filename_2:1024-02000015000241c0000200b6-EN.jpg
- picture_zoom_filename_2:2000-02000015000241c0000200b6-EN.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:
The 750-495 3-Phase Power Measurement Module allows measurement of electrical data in a three-phase supply network.
The voltage is measured via network connection to L1, L2, L3 and N.
The current of the three phases is fed to I1, I2, I3 and IN (two clamping points each +,-) via current transformers or via Rogowski coils for the 750-495/000-002 Module.
The 3-phase power measurement module transmits all metrics (e.g., reactive/apparent/effective power, energy consumption, power factor, phase angle, frequency, over-/undervoltage) directly to the process image, without requiring high computing power from the controller. Both comprehensive metrics and harmonic analysis up to the 41st harmonic permit extensive network analysis via the fieldbus. These metrics enable the operator to optimize supply to a drive or machine, protecting the system from damage and failure. Insulation failures can be detected and prevented via current measurement performed in the neutral conductor. The four-quadrant display indicates the load type (inductive, capacitive) and whether it is an energy consumer or producer.
- Physical data - Depth:67.8 mm / 2.669 inches
- picture_filename_3:1024-020000170001706a000100b6-DE.jpg
- picture_zoom_filename_3:2000-020000170001706a000100b6-DE.jpg
- picture_filename_4:1024-0200002600035df5000100b6-DE.jpg
- picture_zoom_filename_4:2000-0200002600035df5000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:60.6 mm / 2.386 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2
- Primary brand: Wago
- Functions: Standard analog input slice module
- Design: double isolation
- Supply voltage (DC): 5Vdc (supplied by system)
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Analog inputs:
- 3 x analog inputs (3-phase voltage measurement; 400Vac / 690Vac / 45...65Hz / 24-bits conversion)
- 4 x analog inputs (differential current measurement from a Rogowski C.T.)
- Measurement accuracy: AC current/voltage; +-0.5% (measuring error)
- Dimensions: H100mm x W24mm x D67.8mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: 0°C...+55°C
- Ambient air temperature for storage: -40°C...+85°C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance:
- Vibration resistance according to EN 60068-2-6 -- 4g
- Shock resistance according to EN 60068-2-27 --15g
- Current consumption: 100mA (5Vdc; system supply)
- ETIM code: EC001601
- eClass code: 27-24-26-05
- Order code / Manufacturer SKU: 750-495/000-002
- Manufacturer product status: Commercialized
- Equivalent to: 750495000000
- EAN code: 4050820000000
- Compliant with standard(s):
- Safety and protection
- Insulation coordination per EN/UL 61010-2-201 with N connection
- - Insulation type -- Reinforced insulation
- - Note on system voltage -- The system voltage is derived from the line-to-neutral voltage for common MAINS supply systems.
- - Overvoltage category -- III
- - System voltage -- ≤300V
- Insulation coordination per EN/UL 61010-2-201 without N connection
- - Insulation type -- Double isolation (basic isolation and supplementary isolation by impedance/current measurement transformer)
- Safe isolation from the adjacent SELV/PELV modules must be ensured. The product manual contains the types of isolation
- to adjacent modules in section "Isolation to Adjacent I/O Modules per EN/UL 61010 2-201." Without double or reinforced isolation
- the 750-495/000-00x Power Measurement Module must not be placed directly next to SELV/PELV modules.
- The 750-616/040-000 Distance Module must be used under such conditions.
- - Note on system voltage -- the module' N connector must not be connected to ensure safe insulation. The system voltage
- corresponds to the line conductor/neutral conductor voltage which was derived from standard power supply systems
- - Overvoltage category -- III
- - System voltage -- ≤600V
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-3
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-AIM750
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - BSH - Bundesamt fuer Seeschifffahrt und Hydrographie - certificate 1104
- - RINA - RINA Germany GmbH - certificate ELE343521XG001
- Approvals for hazardous areas
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - certificate E198726
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2007-8874
- 2007-8877
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- 855-8001
- 855-8002
- 855-8003
- 855-8004
- 855-9150/2000-1251
- 855-9150/2000-1751
- 855-9150/2000-701
- 855-9450/2000-1251
- 855-9450/2000-1751
- 855-9450/2000-701
- Level 1 category: Automation components
- Level 2 category: Programmable Logic Controllers & components
- Level 3 category: I-O Units
- Product title: Standard analog input slice module - double isolation - Wago
| Main function | I/O unit |
|---|---|
| Product series / family name | 750 series |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Digital inputs quantity | no digital inputs |
| Digital outputs quantity | no digital outputs |
| Analog inputs quantity | 7 |
| Analog inputs type | Current, Voltage |
| Analog input resolution | 24-bit |
| Analog outputs quantity | no analog outputs |
| Degree of protection | IP20 |
| Type - Installation | in cabinet |
| Type - Option | Standard (No options) |
Write Your Own Review