- Technical data - Configuration options:
- WAGO-I/O-CHECK
- CODESYS Library
- e!COCKPIT
- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A, E) green: Function AI 1, AI 2; LED (B, F) red: Error AI 1, AI 2
- Technical data - Number of outgoing power jumper contacts:2
- Technical data - Number of incoming power jumper contacts:2
- Technical data - Data width:2 x 16-bit data; 2 x 8-bit control/status (optional)
- Technical data - Intrinsic safety Ex i:Yes
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Supply voltage (field):24 VDC; (Ex i power supply: Uo = max. 27.3 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)
- Technical data - Current carrying capacity (power jumper contacts):1A
- Technical data - Total number of channels (module):2
- Technical data - Isolation:300 VAC system/supply
- Connection data - Connection type 1:Inputs/outputs
- Mechanical data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Signal type:
- Resistance measurement
- Potentiometer positions
- Technical data - Sensor types:Pt100; Configurable: Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000; Potentiometer setting 0 ... 100 %: 1k2, 5k0
- Technical data - Signal type (configurable):Yes
- Technical data - Measurement error, deviation (max.) from the upper-range value:0.002
- Technical data - Measurement error (reference temperature):25°C
- Technical data - Temperature error (max.) of the upper-range value:0.01%/K
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Environmental requirements - Vibration resistance:4g per IEC 60068-2-6
- Technical data - Conversion time (typ.):325ms
- Technical data - Conversion time:150 ... 500 ms (per channel)
- Technical data - Current consumption (5 V system supply):25mA
- Technical data - Current consumption, field supply (module with no external load):12mA
- Technical data - Power consumption Pmax.:0.45 W
- Commercial data - ETIM 8.0:
- EC001596
- Commercial data - ETIM 7.0:
- EC001596
- Commercial data - eClass 10.0:27-24-26-01
- Commercial data - eClass 9.0:
- 27-24-26-01
- Technical data - Power loss Pl:0.45 W
- sku_code:750-481/003-000
- Commercial data - End of Sale:44561
- Commercial data - End of Delivery:44621
- Commercial data - End of Production:44196
- Commercial data - End of Service and Repair:45291
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:
- KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-AIM750
- UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - certificate 22-2219060
- BV - Bureau Veritas S.A. - certificate 30389/C0 BV
- DNV - DNV GL SE - DNV-CG-0339 / Aug.2021 - certificate TAA0000194
- KR - Korean Register of Shipping - certificate KR HMB05880-AC001
- LR - Lloyds Register EMEA - certificate LR22180952TA
- PRS - Polski Rejestr Statkow - certificate TE/1101/880590/23
- RINA - RINA Germany GmbH - certificate ELE343521XG001
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- approvals_Approvals for hazardous areas:
- AEx - UL International Germany GmbH - UL 60079 - certificate E480271
- ATEX - TUEV Nord Cert GmbH - EN 60079-0 - certificate TUEV_12_ATEX_106032X (Ex ec[iaGa] IIC T4 Gc / [Ex iaDa] IIIC / [Ex iaMa] I)
- CCC - CNEX - CNCA-C23-01 - certificate 2020312310000211 (Ex ec[iaGa] IIC T4 Gc / [Ex iaDa] IIIC / [Ex iaMa] I)
- INMETRO - TUV Rheinland do Brasil Ltda. - certificate TUV_14.1911_X
- TUEV Nord - TUEV Nord Cert GmbH - IEC 60079 - certificate IECEx TUN 12.0039X (Ex ec[iaGa] IIC T4 Gc / [Ex iaDa] IIIC / [Ex iaMa] I)
- UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- Environmental requirements - Exposure to pollutants:per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Explosion protection - Ex standard:EN IEC 60079-0, -7, -11
- Explosion protection - Marking:ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_Supplymodule:
- 750-606
- 750-625/000-001
- manufacturer_description:2-channel analog input; Resistance measurement; Intrinsically safe
- picture_filename_1:1024-0200000f000194d2000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200000f000194d2000100b6-DE.jpg
- Material data - Weight:92.7g
- Material data - Fire load:2.299MJ
- picture_filename_2:1024-020000000003ae92000100b6-EN.jpg
- picture_zoom_filename_2:2000-020000000003ae92000100b6-EN.jpg
- manufacturer_detailed_description:
This analog input module directly connects to Pt and Ni resistance sensors or potentiometers located in hazardous areas of Zones 0 and 1.
The WAGO I/O System 750 must be installed either in Zone 2 or in a non-hazardous area. The 24 V supply is derived from the module's power jumper contacts.
The shield directly connects to the DIN-rail.
Indicators:
- Green LED (availability ON/OFF)
- Red LED (short circuit, wire breakage, measurement range overflow/underflow)
Field and system levels are electrically isolated.
- Commercial data - Product Group:15 (I/O System)
- picture_filename_3:1024-020000000003b8ba000100b6-EN.jpg
- picture_zoom_filename_3:2000-020000000003b8ba000100b6-EN.jpg
- picture_filename_4:1024-0200002600035585000100b6-DE.jpg
- picture_zoom_filename_4:2000-0200002600035585000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:60.6 mm / 2.386 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3, marine applications
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2, marine applications
- Technical data - Number of analog inputs:2
- Technical data - Resolution (over entire range):0.1 °C, 0.1 Ω, 0.0049 %
- Technical data - Temperature range:−200 ... +850 °C (Pt), −60 ... +250 °C (Ni), −80 ... +320 °C (Ni120)
- Primary brand: Wago
- Functions: Intrinsically-safe analog input slice module
- Supply voltage (DC):
- 5Vdc (supplied by system)
- 24Vdc fixed suppl. to field sensing devices
- Programming languages:
- Configuration options
- - WAGO-I/O-CHECK
- - CODESYS Library
- - e!COCKPIT
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Analog inputs: 2 x analog inputs (Configurable RTD Pt100 / Pt200 / Pt500 / Pt1000 / Ni100 / Ni120 / Ni1000 / Potentiometer 1.2kΩ / 5kΩ; 0.1°C resolution / 325ms conversion; 2-wire / 3-wire)
- Measurement accuracy:
- +-0.2% (measuring error)
- +-0.01% (temperature error)
- Dimensions: H100mm x W24mm x D67.8mm
- Net Width (mm): 24mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: 0°C...+55°C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance:
- Vibration resistance according to EN 60068-2-6 -- 4g
- Shock resistance according to EN 60068-2-27 --15g
- Current consumption:
- 25mA (5Vdc; system supply)
- 12mA (field supply; no external load)
- ETIM code: EC001596
- eClass code: 27-24-26-01
- Power dissipation/losses: 0.45W
- Order code / Manufacturer SKU: 750-481/003-000
- Manufacturer product status: Discontinued
- Equivalent to: 750481000000
- Product lifecycle information:
- End of life announced on -- 2022 Jan 04
- End of sales -- 2021 Dec 31
- End of production -- 2022 Feb 01
- End of delivery -- 2022 Mar 01
- End of service and repair -- 2023 Dec 31
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- - marine applications
- EMC emission of interference
- - EN 61000-6-3
- - marine applications
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-AIM750
- - UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - certificate 22-2219060
- - BV - Bureau Veritas S.A. - certificate 30389/C0 BV
- - DNV - DNV GL SE - DNV-CG-0339 / Aug.2021 - certificate TAA0000194
- - KR - Korean Register of Shipping - certificate KR HMB05880-AC001
- - LR - Lloyds Register EMEA - certificate LR22180952TA
- - PRS - Polski Rejestr Statkow - certificate TE/1101/880590/23
- - RINA - RINA Germany GmbH - certificate ELE343521XG001
- Approvals for hazardous areas
- - AEx - UL International Germany GmbH - UL 60079 - certificate E480271
- - ATEX - TUV Nord Cert GmbH - EN 60079-0 - certificate TUV_12_ATEX_106032X (Ex ec[iaGa] IIC T4 Gc / [Ex iaDa] IIIC / [Ex iaMa] I)
- - CCC - CNEX - CNCA-C23-01 - certificate 2020312310000211 (Ex ec[iaGa] IIC T4 Gc / [Ex iaDa] IIIC / [Ex iaMa] I)
- - INMETRO - TUV Rheinland do Brasil Ltda. - certificate TUV_14.1911_X
- - TUV Nord - TUV Nord Cert GmbH - IEC 60079 - certificate IECEx TUN 12.0039X (Ex ec[iaGa] IIC T4 Gc / [Ex iaDa] IIIC / [Ex iaMa] I)
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Degree of pollution: 2
- Cross-sells with:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 750-606
- 750-625/000-001
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- Level 1 category: Automation components
- Level 2 category: Programmable Logic Controllers & components
- Level 3 category: I-O Units
- Product title: Intrinsically-safe analog input slice module - Wago
| Main function | I/O unit |
|---|---|
| Product series / family name | 750 series |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Digital inputs quantity | no digital inputs |
| Digital outputs quantity | no digital outputs |
| Analog inputs quantity | 2 |
| Analog inputs type | RTD, RTD type Ni1000 |
| Analog outputs quantity | no analog outputs |
| Degree of protection | IP20 |
| Type - Installation | in cabinet |
| Type - Option | intrinsically-safe |
Write Your Own Review