Wago - 750-1415/040-000
$214.50
Wago - 750-1415/040-000 is available to buy in increments of 1
Overview
8-channel digital input; 24 VDC; 3 ms; 2-conductor connection; Extreme; dark gray
- Environmental requirements - Operating altitude:without temperature derating: 0 ... 2000 m; with temperature derating: 2000 ... 5000 m (0.5 K/100 m); 5000 m (max.)
- Technical data - Indicators:LED (1-8) green: Status DI 1 ... DI 8
- Technical data - Number of outgoing power jumper contacts:2
- Technical data - Number of incoming power jumper contacts:2
- Technical data - Voltage range for signal (0):-3 ... +5 VDC
- Technical data - Voltage range for signal (1):11 ... 30 VDC
- Technical data - Input data width (internal) max.:8bits
- Technical data - Input filter (digital):
- 3
- 3ms
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Supply voltage (field):24 VDC (-25 ... +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact); Derating must be observed!
- Technical data - Current carrying capacity (power jumper contacts):10A
- Material data - Color:dark gray
- Technical data - Total number of channels (module):8
- Technical data - Rated surge voltage:1 kV
- Technical data - Dielectric strength:510°VAC / 775°VDC; per EN°60870-2-1
- Connection data - Connection type 1:Input
- Connection data - Solid conductor:0.25 ... 1.5 mm2 / 24 ... 16 AWG
- Connection data - Fine-stranded conductor:0.25 ... 1.5 mm2 / 24 ... 16 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Sensor connection:8 x (2-wire)
- Technical data - Input characteristic:
- high-side switching
- Type 3
- Technical data - Signal type:
- Digital
- Voltage
- Technical data - Signal type (voltage):24 VDC
- Physical data - Width:12 mm / 0.472 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):-40 ... +70 °C
- Technical data - Derating:Derating (supply voltage):
Ambient temperatures under laboratory conditions: (-25 ... +30°%);
for -40 ... +55°°C: 24°V (-25 ... +20°%);
for +55 ... +70°°C: 24°V (-25 ... +10°%);
Lower limit in all temperature ranges: -27.5°% (including 15°% residual ripple) - Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Relative humidity (with condensation):Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
- Environmental requirements - Shock resistance:per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 50155, EN 61373
- Environmental requirements - Vibration resistance:per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155; EN 61373
- Technical data - Current consumption (5 V system supply):6mA
- Technical data - Current consumption, field supply (module with no external load):2mA
- Technical data - Input current per channel for signal (1) typ.:4.5mA
- Technical data - Input current per channel for signal (0) typ.:1.6mA
- Technical data - Input current per channel for signal (1) max.:4.6mA
- Technical data - Input current per channel for signal (1) min.:4.3mA
- Commercial data - GTIN:4050820000000
- Commercial data - ETIM 8.0:EC001599
- Commercial data - ETIM 7.0:EC001599
- Commercial data - eClass 10.0:27-24-26-04
- Commercial data - eClass 9.0:27-24-26-04
- Commercial data - Customs tariff number:85389099990
- sku_code:750-1415/040-000
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:
- KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-DIM750
- UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:
- ABS - American Bureau of Shipping - certificate 22-2208829-PDA
- DNV - DNV GL SE - certificate TAA00000Y7
- LR - Lloyds Register - certificate LR22276776TA
- PRS - Polski Rejestr Statkow - certificate TE/1099/880590/23
- Environmental Product Compliance - RoHS Exemption:
- 7(a)
- 7(c)-I
- approvals_Approvals for hazardous areas:
- ATEX - TUEV Nord Cert GmbH - EN 60079-0 - certificate TUEV 17 ATEX 193969X (II 3 G Ex ec IIC T4 Gc)
- CCC - CNEX - CNCA-C23-01 - certificate 2020312310000214 (Ex ec IIC T4 Gc)
- EAC - Brjansker Zertifizierungsstelle - TP TC 012/2011 - certificate EAC RU C-DE.AM02.B.00163/19 (2Ex e IIC T4 Gc X)
- IECEx - TUEV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 16.0046X (Ex ec IIC T4 Gc)
- UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX005X_ec
- UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- Environmental requirements - Exposure to pollutants:Per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Commercial data - Country of origin:DE
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Tools:210-719
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_SystemBox:
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- ACCESSORIES_Supplymodule:
- 750-602/040-000
- 750-612/040-000
- manufacturer_description:8-channel digital input; 24 VDC; 3 ms; 2-conductor connection; Extreme
- picture_filename_1:1024-0200001800001347000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001800001347000100b6-DE.jpg
- Material data - Weight:46.8g
- Material data - Fire load:0.835MJ
- picture_filename_2:1024-020000180000f277000100b6-EN.jpg
- picture_zoom_filename_2:2000-020000180000f277000100b6-EN.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:
This digital input module is a 2-wire device featuring eight channels in a width of just 12 mm (0.47 inch).
It receives binary control signals from digital field devices (e.g., sensors, encoders, switches or proximity sensors).
The module features Push-in CAGE CLAMP(R) connections enabling solid conductors to be connected by simply pushing them in.
Each input channel has a noise-rejection RC filter with 3.0 ms time constant.
A green LED indicates the signal state of each channel.
Field and system levels are electrically isolated.
An operating tool with a 2.5 mm blade (210-719) is required to open the Push-in CAGE CLAMP(R) connections.
The device is ideal for operation in extreme environments thanks to:
- An extended temperature range
- Greater immunity to impulse voltages and electromagnetic interference
- Higher vibration and shock resistance
- Physical data - Depth:69 mm / 2.717 inches
- Commercial data - Product Group:15 (I/O System)
- picture_filename_3:1024-0200001800010478000100b6-EN.jpg
- picture_zoom_filename_3:2000-0200001800010478000100b6-EN.jpg
- picture_filename_4:1024-020000260003a175000100b6-DE.jpg
- picture_zoom_filename_4:2000-020000260003a175000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:61.8 mm / 2.433 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5
- Environmental requirements - EMC immunity to interference:per EN 61000-6-1, -2; EN 61131-2; marine applications; EN 50121-3-2; EN 50121-4, -5; EN 60255-26;
EN 60870-2-1; EN 61850-3; IEC 61000-6-5; IEEE 1613; VDEW: 1994 - Technical data - Number of digital inputs:8
- Primary brand: Wago
- Functions: Standard DC digital input slice module
- Design: extended temperature range
- Supply voltage (DC):
- 5Vdc (supplied by system)
- 18-32.5Vdc adjustable suppl. to field sensing devices
- Connection type: Push-in spring CAGE CLAMP connections
- Mounting mode: DIN-35 rail
- Digital inputs:
- 8 x digital inputs (24Vdc transistor; type-3 high-side switching; 2-wire; 3ms filter)
- Digital inputs voltage ranges -3...+5Vdc (OFF) / 11-30Vdc (ON)
- Dimensions: H100mm x W12mm x D69mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: -40°C...+70°C
- Ambient air temperature for storage: -40°C...+85°C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance:
- Vibration resistance according to EN 60068-2-6 -- 5g
- Shock resistance according to EN 60068-2-27 --15g (11ms / half-sine / 1000 shocks)
- Shock resistance according to EN 60068-2-27 --25g (6ms / 1000 shocks)
- Current consumption:
- 6mA (5Vdc; system supply)
- 2mA (field supply; no external load)
- GTIN code: 4050820000000
- ETIM code: EC001599
- eClass code: 27-24-26-04
- Customs Tariff Number: 85389099990
- Order code / Manufacturer SKU: 750-1415/040-000
- Manufacturer product status: Commercialized
- Equivalent to: 7501420000000
- EAN code: 4050820000000
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-1
- - EN 61000-6-2
- - EN 61131-2
- - marine applications
- - EN 50121-3-2
- - EN 50121-4
- - EN 50121-5
- - EN 60255-26
- - EN 60870-2-1
- - EN 61850-3
- - IEC 61000-6-5
- - IEEE 1613
- - VDEW (1994)
- EMC emission of interference
- - EN 61000-6-3
- - EN 61000-6-4
- - EN 61131-2
- - EN 60255-26
- - marine applications
- - EN 60870-2-1
- - EN 61850-3
- - EN 50121-3-2
- - EN 50121-4
- - EN 50121-5
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-DIM750
- - UL - UL International Netherlands B.V. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.1
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- Approvals for marine applications
- - ABS - American Bureau of Shipping - certificate 22-2208829-PDA
- - DNV - DNV GL SE - certificate TAA00000Y7
- - LR - Lloyds Register - certificate LR22276776TA
- - PRS - Polski Rejestr Statkow - certificate TE/1099/880590/23
- Approvals for hazardous areas
- - ATEX - TUV Nord Cert GmbH - EN 60079-0 - certificate TUV 17 ATEX 193969X (II 3 G Ex ec IIC T4 Gc)
- - CCC - CNEX - CNCA-C23-01 - certificate 2020312310000214 (Ex ec IIC T4 Gc)
- - EAC - Brjansker Zertifizierungsstelle - TP TC 012/2011 - certificate EAC RU C-DE.AM02.B.00163/19 (2Ex e IIC T4 Gc X)
- - IECEx - TUV Nord Cert GmbH - IEC 60079-0 - certificate IECEx TUN 16.0046X (Ex ec IIC T4 Gc)
- - UKEx - WAGO GmbH & Co. KG - EN 60079-0 - certificate UKCA_WAGO22UKEX005X_ec
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726 Sec.1
- RoHS compliant with exemption (7(a) / 7(c)-I)
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 210-719
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 750-602/040-000
- 750-612/040-000
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- Level 1 category: Automation components
- Level 2 category: Programmable Logic Controllers & components
- Level 3 category: I-O Units
- Product title: Standard DC digital input slice module - Wago (XTR)
| Main function | I/O unit |
|---|---|
| Product series / family name | 750 series |
| Sub-range name | XTR |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Digital inputs quantity | 8 |
| Digital inputs type | DC |
| Digital outputs quantity | no digital outputs |
| Analog inputs quantity | no analog inputs |
| Analog outputs quantity | no analog outputs |
| Degree of protection | IP20 |
| Type - Installation | in cabinet |
| Type - Option | extended temperature range, special switching version (high-side switching) |
Write Your Own Review