Wago - 787-1640
$300.00
Wago - 787-1640 is available to buy in increments of 1
Overview
Switched-mode power supply; Classic; 3-phase; 24 VDC output voltage; 10 A output current; TopBoost; DC OK contact
- Technical data - Input - Nominal mains frequency range:47 ... 63 Hz; 0 Hz
- Safety and protection - Series operation:Yes
- Safety and protection - Parallel operation:Yes
- Technical data - Signaling and communication - Signaling:1 x LED DC OK (green)
- Technical data - Signaling and communication - Operation status indicator:Green LED (Uo)
- Technical data - Input - Power factor correction (PFC):Passive
- Technical data - Input - Nominal input voltage Ui nom:(2 / 3) x AC 400 ... 500 V
- Technical data - Input - Input voltage range:(2 / 3) x AC 320 ... 575 V; DC 450 ... 800 V
- Technical data - Input - Phases:45325
- Technical data - Output - Nominal output current Io nom:10 A (24 VDC)
- Technical data - Output - Nominal output power:240W
- Technical data - Output - Nominal output voltage Uo nom:DC 24 V (SELV)
- Technical data - Output - Output voltage range:DC 23 ... 28.5 V (adjustable)
- Technical data - Output - Default setting:DC 24 V
- Connection data - Connection type 1:Input/Output/Signaling
- Connection data - Connection technology:CAGE CLAMP(R)
- Connection data - WAGO connector:WAGO 721 Series
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Safety and protection - Transient suppression (primary):Varistor
- Safety and protection - Open-circuit-proof:Yes
- Technical data - Output - Current limitation:1.1 x Io nom (typ.)
- Safety and protection - Short-circuit-protected:Yes
- Technical data - Output - Overload behavior:Constant current
- Safety and protection - Overvoltage protection; secondary:
- Internal protective circuit
- ≤ 41 VDC (in the event of a fault)
- Technical data - Efficiency/power losses - Efficiency (typ.):0.9
- Mechanical Data - Mounting type:DIN-35 rail
- Technical data - Output - Deviation:≤ 1 %
- Physical data - Width:55 mm / 2.165 inches
- Environmental requirements - Ambient temperature (operation):-25 ... +70 °C (Device starts at -40 °C (type-tested))
- Environmental requirements - Derating:-2.5°%/K (> 55°°C)
- Environmental requirements - Ambient temperature (storage):-25 ... +85 °C
- Environmental requirements - Relative humidity:5 ... 96 % (no condensation permissible)
- Technical data - Input - Input current Ii:≤ 3 x 0.73 A (400 VAC); ≤ 3 x 0.66 A (500 VAC)
- Technical data - Input - Inrush current:≤ 30 A (NTC)
- Commercial data - GTIN:4055140000000
- Commercial data - ETIM 8.0:EC002540
- Commercial data - ETIM 7.0:EC002540
- Commercial data - eClass 10.0:27-04-07-01
- Commercial data - eClass 9.0:27-04-07-01
- Commercial data - Customs tariff number:85044083900
- Technical data - Efficiency/power losses - Power loss Pl:≤ 2.1 W; ≤ 27.9 W (400 VAC; nominal load)
- Technical data - Efficiency/power losses - Power loss (max.) Pl (max.):28.3 W (500 VAC / 24 VDC; 10 A)
- sku_code:787-1640
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_General approvals:
- UL - Underwriters Laboratories Inc. - UL 508 - certificate E255817
- UL - Underwriters Laboratories Inc. - UL 60950-1 - certificate E255815
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- MFD for SEMI F47 - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:DNV - DNV Germany GmbH - DNV-CG-0339 / Aug.2021 - certificate TAA00000KT
- Standards and specifications - Standards/specifications:
- EN 61010-1
- EN 61010-2-201
- EN 61204-3
- UL 60950-1
- UL 508
- DNV
- SEMI F47
- Standards and specifications - Conformity marking:CE
- Safety and protection - Overvoltage category:II
- Safety and protection - Protection class:I
- Safety and protection - Isolation voltage (sec.-PE):DC 0.7 kV
- Commercial data - Country of origin:DE
- Safety and protection - Pollution degree:2
- Technical data - Output - Residual ripple:≤ 50 mV (peak-to-peak)
- Safety and protection - MTBF:> 500,000 h (per IEC 61709)
- Technical data - Input - Mains failure hold-up time:≥ 50 ms (500 VAC); ≥ 21 ms (400 VAC)
- ACCESSORIES_Markingaccessories:
- 2009-110
- 2009-115
- 210-831
- 210-832
- 793-501
- 793-5501
- ACCESSORIES_Tools:
- 210-720
- 210-769
- ACCESSORIES_Mountingadapter:787-897/000-010
- manufacturer_description:Switched-mode power supply; Classic; 3-phase; 24 VDC output voltage; 10 A output current; TopBoost; DC OK contact
- picture_filename_1:1024-0200001e00022a05000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001e00022a05000100b6-DE.jpg
- Material data - Weight:1000g
- Material data - Fire load:0.417MJ
- picture_filename_2:1024-0200001e000251c0000100b6-DE.jpg
- picture_zoom_filename_2:2000-0200001e000251c0000100b6-DE.jpg
- Physical data - Height:127 mm / 5 inches
- manufacturer_detailed_description:
Features:
- Switched-mode power supply with TopBoost, enabling secondary-side protection via circuit breakers
- Natural convection cooling when horizontally mounted
- Encapsulated for use in control cabinets
- DC OK contact
- Suitable for both parallel and series operation
- Electrically isolated output voltage (SELV) per UL 60950-1; PELV per EN 60204
- Physical data - Depth from upper-edge of DIN-rail:171 mm / 6.732 inches
- Safety and protection - Protection type:IP20; per EN 60529
- Primary brand: Wago
- Network frequency: 44-63Hz
- Functions:
- Classic switch-mode AC/DC power supply unit (SMPS PSU)
- TopBoost
- Series operation possible
- Parallel operation possible
- Supply voltage (AC): 320-575Vac (380Vac / 400Vac / 415Vac / 480Vac)
- Supply voltage (DC): 450-800Vdc
- Type of network: 3-phase AC (3AC) or DC
- Rated current:
- 10A (-25...+55°C)
- 6.25A (70°C; -2.5% output derating for every 1K temperature rise above 55°C)
- Rated power: 240W
- Output voltage (DC):
- 24Vdc (SELV)
- 23-28.5Vdc (adjustable)
- Hold time:
- 50ms (500Vac input)
- 21ms (400Vac input)
- Connection type: CAGE CLAMP spring connections
- Protection functions:
- Constant current
- Short-circuit protection
- Open circuit protection
- 1.1 x Io nom (typ.) current limitation function
- Efficiency: 0.9
- Mounting mode: DIN-35 rail
- Measurement accuracy: ≤ 1% (output error)
- Dimensions: H127mm x W55mm x D171mm
- Net Width (mm): 55mm
- Ambient air temperature for operation: -25°C...+70°C
- Ambient air temperature for storage: -25°C...+85°C
- Humidity: 5-96% relative humidity (RH; non-condensing)
- Current consumption:
- 3 x 0.73A (400Vac)
- 3 x 0.66A (500Vac)
- GTIN code: 4055140000000
- ETIM code: EC002540
- eClass code: 27-04-07-01
- Customs Tariff Number: 85044083900
- Order code / Manufacturer SKU: 787-1640
- Manufacturer product status: Commercialized
- Equivalent to: 7871640
- EAN code: 4055140000000
- Compliant with standard(s):
- Safety and protection
- - Isolation voltage (sec.-PE; DC) -- DC 0.7kV
- CE
- DNV
- EN 61010-1
- EN 61010-2-201
- EN 61204-3
- SEMI F47
- UL 508
- UL 60950-1
- General approvals
- - UL - Underwriters Laboratories Inc. - UL 508 - certificate E255817
- - UL - Underwriters Laboratories Inc. - UL 60950-1 - certificate E255815
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - MFD for SEMI F47 - WAGO GmbH & Co. KG
- Approvals for marine applications
- - DNV - DNV Germany GmbH - DNV-CG-0339 / Aug.2021 - certificate TAA00000KT
- RoHS compliant
- Location of origin: Germany
- Degree of pollution: 2
- Ripple: 50mVpp (output voltage)
- MTBF (Mean Time Between Failures): 500 000h
- Cross-sells with:
- 2009-110
- 2009-115
- 210-720
- 210-769
- 210-831
- 210-832
- 787-897/000-010
- 793-501
- 793-5501
- Level 1 category: Automation components
- Level 2 category: Power supply units
- Product title: Classic switch-mode AC/DC power supply unit (SMPS PSU) - Wago (Classic series)
Main function | Power supply unit |
---|---|
Product series / family name | Power supply units |
Sub-range name | Classic series |
Supply voltage (AC) | 380Vac, 525Vac |
Supply voltage (DC) | 500Vdc, 800Vdc |
Rated current | 5A < In ≤ 10A |
Rated power (W) | 200W < Pn ≤ 250W |
Output voltage (DC) | 20Vdc < Vout ≤ 25Vdc |
Connection type (electrical) | Terminals (Spring) |
Mounting mode | DIN rail |
Degree of protection | IP20 |
Type - Input | 3-phase AC, DC |
Type - Option | special version (with TopBoost) |
Write Your Own Review