Wago - 787-1633
$470.00
Wago - 787-1633 is available to buy in increments of 1
Overview
Switched-mode power supply; Classic; 1-phase; 48 VDC output voltage; 5 A output current; TopBoost; DC OK contact
- Technical data - Input - Nominal mains frequency range:44 ... 66 Hz; 0 Hz
- Safety and protection - Series operation:Yes
- Safety and protection - Parallel operation:Yes
- Technical data - Signaling and communication - Signaling:1 x LED DC OK (green)
- Technical data - Signaling and communication - Operation status indicator:Green LED (Uo)
- Technical data - Input - Power factor correction (PFC):Active
- Technical data - Input - Nominal input voltage Ui nom:1 x AC 100 ... 240 V
- Technical data - Input - Input voltage range:1 x AC 85 ... 264 V; DC 120 ... 300 V
- Technical data - Input - Phases:1
- Technical data - Output - Nominal output current Io nom:5 A (48 VDC)
- Technical data - Output - Nominal output power:240W
- Technical data - Output - Nominal output voltage Uo nom:DC 48 V (SELV)
- Technical data - Output - Output voltage range:DC 40 ... 56 V (adjustable)
- Technical data - Output - Default setting:DC 48 V
- Connection data - Connection type 1:Input/Output/Signaling
- Connection data - Connection technology:CAGE CLAMP(R)
- Connection data - WAGO connector:WAGO 721 Series
- Connection data - Connection technology 2:Push-in CAGE CLAMP(R)
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
- Safety and protection - Transient suppression (primary):Varistor
- Safety and protection - Open-circuit-proof:Yes
- Technical data - Output - Current limitation:1.1 x Io nom (typ.)
- Safety and protection - Short-circuit-protected:Yes
- Technical data - Output - Overload behavior:Constant current
- Safety and protection - Overvoltage protection; secondary:
- Internal protective circuit
- ≤ 60 VDC (in the event of a fault)
- Technical data - Efficiency/power losses - Efficiency (typ.):0.92
- Mechanical Data - Mounting type:DIN-35 rail
- Technical data - Output - Deviation:≤ 1 %
- Physical data - Width:55 mm / 2.165 inches
- Environmental requirements - Ambient temperature (operation):-25 ... +70 °C (Device starts at -40 °C (type-tested))
- Environmental requirements - Derating:-5°%/K (> 60°°C, 196 ... 264°VAC); -2.5°%/K (> 50°°C, 85 ... 195°VAC)
- Environmental requirements - Ambient temperature (storage):-25 ... +85 °C
- Environmental requirements - Relative humidity:5 ... 96 % (no condensation permissible)
- Technical data - Input - Input current Ii:≤ 1.25 A (230 VAC); ≤ 2.74 A (100 VAC)
- Technical data - Input - Inrush current:≤ 30 A
- Commercial data - GTIN:4055140000000
- Commercial data - ETIM 8.0:EC002540
- Commercial data - ETIM 7.0:EC002540
- Commercial data - eClass 10.0:27-04-07-01
- Commercial data - eClass 9.0:27-04-07-01
- Commercial data - Customs tariff number:85044083900
- Technical data - Efficiency/power losses - Power loss Pl:≤ 7 W; ≤ 40.8 W (230 VAC; nominal load)
- Technical data - Efficiency/power losses - Power loss (max.) Pl (max.):26.5 W (100 VAC / 48 VDC; 5 A)
- sku_code:787-1633
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_General approvals:
- UL - Underwriters Laboratories Inc. - UL 60950-1 - certificate E255815
- UL - Underwriters Laboratories Inc. - UL 508 - certificate E255817
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- MFD for SEMI F47 - WAGO GmbH & Co. KG - certificate -
- approvals_Approvals for marine applications:DNV - DNV Germany GmbH - DNVGL-CG-339 / Dec.2019 - certificate TAA00002YC
- Standards and specifications - Standards/specifications:
- EN 61010-1
- EN 61010-2-201
- EN 61204-3
- UL 60950-1
- UL 508
- DNV
- SEMI F47
- Standards and specifications - Conformity marking:CE
- Safety and protection - Overvoltage category:II
- Safety and protection - Protection class:I
- Safety and protection - Isolation voltage (sec.-PE):DC 0.7 kV
- Commercial data - Country of origin:DE
- Safety and protection - Pollution degree:2
- Technical data - Output - Residual ripple:≤ 30 mV (peak-to-peak)
- Safety and protection - MTBF:> 500,000 h (per IEC 61709)
- Technical data - Input - Mains failure hold-up time:≥ 21 ms (230 VAC); ≥ 21 ms (100 VAC)
- ACCESSORIES_Markingaccessories:
- 2009-110
- 2009-115
- 210-831
- 210-832
- 793-501
- 793-5501
- ACCESSORIES_Tools:
- 210-720
- 210-769
- ACCESSORIES_Mountingadapter:787-897/000-010
- manufacturer_description:Switched-mode power supply; Classic; 1-phase; 48 VDC output voltage; 5 A output current; TopBoost; DC OK contact
- picture_filename_1:1024-0200001e000236e0000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001e000236e0000100b6-DE.jpg
- Material data - Weight:930g
- picture_filename_2:1024-020000190003db16000100b6-DE.jpg
- picture_zoom_filename_2:2000-020000190003db16000100b6-DE.jpg
- Physical data - Height:127 mm / 5 inches
- manufacturer_detailed_description:
Features:
- Switched-mode power supply
- Natural convection cooling when horizontally mounted
- Encapsulated for use in control cabinets
- DC OK contact
- Suitable for both parallel and series operation
- Electrically isolated output voltage (SELV) per UL 60950-1; PELV per EN 60204
- GL approval, also suitable for EMC 1 in conjunction with 787-980 Filter Module
- Commercial data - Product Group:6 (INTERFACE ELECTRONIC)
- Physical data - Depth from upper-edge of DIN-rail:172 mm / 6.772 inches
- Safety and protection - Protection type:IP20; per EN 60529
- Primary brand: Wago
- Network frequency: 44-66Hz
- Functions:
- Classic switch-mode AC/DC power supply unit (SMPS PSU)
- TopBoost
- Series operation possible
- Parallel operation possible
- Supply voltage (AC): 85-264Vac (110Vac / 120Vac / 220Vac / 230Vac / 240Vac)
- Supply voltage (DC): 120-300Vdc
- Type of network: Single-phase AC (1AC) or DC
- Rated current:
- 5A (-25...+50°C)
- 3.75A (60°C; -2.5% output derating for every 1K temperature rise above 50°C)
- 1.25A (70°C; -5% output derating for every 1K temperature rise above 60°C)
- Rated power: 240W
- Output voltage (DC):
- 48Vdc (SELV)
- 40-56Vdc (adjustable)
- Hold time:
- 21ms (230Vac input)
- 21ms (100Vac input)
- Connection type: CAGE CLAMP spring connections
- Protection functions:
- T 6.3A / 250Vac internal fuse
- Constant current
- Short-circuit protection
- Open circuit protection
- 1.1 x Io nom (typ.) current limitation function
- Efficiency: 0.92
- Mounting mode: DIN-35 rail
- Measurement accuracy: ≤ 1% (output error)
- Dimensions: H127mm x W55mm x D172mm
- Net Width (mm): 55mm
- Ambient air temperature for operation: -25°C...+70°C
- Ambient air temperature for storage: -25°C...+85°C
- Humidity: 5-96% relative humidity (RH; non-condensing)
- Current consumption:
- 1.25A (230Vac)
- 2.74A (100Vac)
- GTIN code: 4055140000000
- ETIM code: EC002540
- eClass code: 27-04-07-01
- Customs Tariff Number: 85044083900
- Order code / Manufacturer SKU: 787-1633
- Manufacturer product status: Commercialized
- Equivalent to: 7871633
- EAN code: 4055140000000
- Compliant with standard(s):
- Safety and protection
- - Isolation voltage (sec.-PE; DC) -- DC 0.7kV
- CE
- DNV
- EN 61010-1
- EN 61010-2-201
- EN 61204-3
- SEMI F47
- UL 508
- UL 60950-1
- General approvals
- - UL - Underwriters Laboratories Inc. - UL 60950-1 - certificate E255815
- - UL - Underwriters Laboratories Inc. - UL 508 - certificate E255817
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - MFD for SEMI F47 - WAGO GmbH & Co. KG
- Approvals for marine applications
- - DNV - DNV Germany GmbH - DNVGL-CG-339 / Dec.2019 - certificate TAA00002YC
- RoHS compliant
- Location of origin: Germany
- Degree of pollution: 2
- Ripple: 30mVpp (output voltage)
- MTBF (Mean Time Between Failures): 500 000h
- Cross-sells with:
- 2009-110
- 2009-115
- 210-720
- 210-769
- 210-831
- 210-832
- 787-897/000-010
- 793-501
- 793-5501
- Level 1 category: Automation components
- Level 2 category: Power supply units
- Product title: Classic switch-mode AC/DC power supply unit (SMPS PSU) - Wago (Classic series)
Main function | Power supply unit |
---|---|
Product series / family name | Power supply units |
Sub-range name | Classic series |
Supply voltage (AC) | 100Vac, 240Vac |
Supply voltage (DC) | 120Vdc, 250Vdc |
Rated current | 1A < In ≤ 5A |
Rated power (W) | 200W < Pn ≤ 250W |
Output voltage (DC) | 45Vdc < Vout ≤ 50Vdc |
Connection type (electrical) | Terminals (Spring) |
Mounting mode | DIN rail |
Degree of protection | IP20 |
Type - Input | 1-phase AC, DC |
Type - Option | special version (with TopBoost) |
Write Your Own Review