Wago - 2787-2134

Technical data - Input - Nominal mains frequency range:50 ... 60 Hz
Safety and protection - Series operation:Yes
Safety and protection - Parallel operation:Yes
Environmental requirements - Operating altitude (max.):5000m
Technical data - Signaling and communication - Signaling:Digital signal input and output (DI/DO)
Technical data - Input - Power factor correction (PFC):Active
Technical data - Input - Nominal input voltage U_{i nom}:1 x AC 100 ... 240 V
Technical data - Input - Input voltage range:1 x AC 90 ... 264 V
Technical data - Input - Phases:1
Technical data - Output - Nominal output current I_{o nom}:10 A (12 VDC)
Technical data - Output - PowerBoost:DC 15 A (5 s)
Technical data - Output - TopBoost:Up to 600 %
Technical data - Output - Nominal output power:120W
Technical data - Output - Nominal output voltage U_{o nom}:DC 12 V (SELV)
Technical data - Output - Output voltage range:DC 12 ... 14 V (adjustable)
Technical data - Output - Default setting:DC 12 V
Connection data - Connection type 1:Input/output/signaling
Connection data - Connection technology:CAGE CLAMP^(R)
Connection data - WAGO connector:WAGO 721 Series
Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 12 AWG
Connection data - Fine-stranded conductor; with insulated ferrule:2.5 ... 1.5 mm2 / 12 ... 16 AWG
Connection data - Fine-stranded conductor; with uninsulated ferrule:1.5 ... 0.08 mm2 / 16 ... 28 AWG
Safety and protection - Transient suppression (primary):Yes
Safety and protection - Open-circuit-proof:Yes
Technical data - Output - Current limitation:1.1 x I_{o nom} (typ.)
Safety and protection - Short-circuit-protected:Yes
Technical data - Output - Overload behavior:TopBoost/PowerBoost/Time-limited constant current mode (other overload behaviors can be set)
Technical data - Efficiency/power losses - Efficiency (typ.):0.938
Mechanical Data - Mounting type:DIN-35 rail
Technical data - Output - Deviation:≤ 1 %
Physical data - Note (dimensions):
- Height without connector
- Height with connector: 166 mm
Physical data - Width:35 mm / 1.378 inches
Environmental requirements - Ambient temperature (operation):-25 ... +70 °C (Device starts at -40 °C (type-tested))
Environmental requirements - Derating:See instruction leaflet
Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
Environmental requirements - Relative humidity:5 ... 96 % (no condensation permissible)
Technical data - Input - Input current I_i:≤ 1.3 A
Technical data - Input - Inrush current:≤ 9.6 A (after 1 ms)
Commercial data - GTIN:4066970000000
Commercial data - ETIM 8.0:EC002540
Commercial data - ETIM 7.0:EC002540
Commercial data - Customs tariff number:85044083900
Technical data - Efficiency/power losses - Power loss P_l:≤ 0.8 W (standby); ≤ 1.6 W (No load); ≤ 10 W (230 VAC; nominal load)
sku_code:2787-2134
Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
approvals_General approvals:UL - Underwriters Laboratories Inc. - UL 61010-2-201 - certificate E255817
approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- MFD for SEMI F47 - WAGO GmbH & Co. KG - certificate -
approvals_Approvals for hazardous areas:UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726
Standards and specifications - Standards/specifications:
- SEMI F47
- EN 61010-1
- EN 61010-2-201
- EN 61204-3
- UL 61010-1
- UL 61010-2-201
Standards and specifications - Conformity marking:CE
Safety and protection - Overvoltage category:III (≤ 2000 m a.s.l.); II (> 2000 m a.s.l.)
Safety and protection - Protection class:I
Safety and protection - Isolation voltage (sec.-PE):DC 0.5 kV
Commercial data - Country of origin:CN
Safety and protection - Pollution degree:2
Technical data - Output - Residual ripple:≤ 70 mV (peak-to-peak)
Safety and protection - MTBF:> 1,200,000 h (per IEC 61709)
Technical data - Input - Mains failure hold-up time:≥ 40 ms (230 VAC)
ACCESSORIES_Markingaccessories:2789-1233
ACCESSORIES_Communication:
- 2789-9015
- 2789-9023
- 2789-9052
- 2789-9080
manufacturer_description:Power supply; Pro 2; 1-phase; 12 VDC output voltage; 10 A output current; TopBoost + PowerBoost; communication capability
picture_filename_1:1024-8685645-DE.jpg
picture_zoom_filename_1:2000-8685645-DE.jpg
Material data - Weight:650g
picture_filename_2:1024-8685646-DE.jpg
picture_zoom_filename_2:2000-8685646-DE.jpg
Physical data - Height:130 mm / 5.118 inches
manufacturer_detailed_description:
Features:
- Power supply with TopBoost, PowerBoost and configurable overload behavior
- Configurable digital signal input and output, optical status indication, function keys
- Communication interface for configuration and monitoring
- Optional connection to IO-Link, EtherNet/IP^TM, Modbus TCP or Modbus RTU
- Suitable for both parallel and series operation
- Natural convection cooling when horizontally mounted
- Pluggable connection technology
- Electrically isolated output voltage (SELV/PELV) per EN 61010-2-201/UL 61010-2-201
- Marker slot for WAGO marking cards (WMB) and WAGO marking strips
picture_filename_3:1024-02000023000163dd000200b6-DE.jpg
picture_zoom_filename_3:2000-02000023000163dd000200b6-DE.jpg
Physical data - Depth from upper-edge of DIN-rail:130 mm / 5.118 inches
Safety and protection - Protection type:IP20; per EN 60529
Technical data - Signaling and communication - Communication:
- EtherNet/IP^TM (2789-9023 Communication Module)
- USB (750-923 Communication Cable)
- Ethernet/IP (2789-9023 Communication Module)
- IO-Link (2789-9080 Communication Module)
- Modbus RTU (Communication Module 2789-9015)
- Modbus TCP (2789-9052 Communication Module)
Primary brand: Wago
Network frequency: 47-63Hz
Functions:
- Pro2 switch-mode AC/DC power supply unit (SMPS PSU)
- TopBoost
- PowerBoost
- Series operation possible
- Parallel operation possible
- LED status indication (DC OK; load; warning and error states)
- Digital signal input and output (DI/DO)
Design: communication capability (with optional module)
Supply voltage (AC): 90-264Vac (110Vac / 120Vac / 220Vac / 230Vac / 240Vac)
Supply voltage (DC): 130-240Vdc
Type of network: Single-phase AC (1AC) or DC
Rated current:
- 10A
- 15A (5s) PowerBoost
- up to 600% TopBoost
Rated power: 120W
Output voltage (DC):
- 12Vdc (SELV)
- 12-14Vdc (adjustable)
Hold time: 40ms (230Vac input)
Connection type: CAGE CLAMP spring connections
Protection functions:
- T 6.3A / 250Vac internal fuse
- TopBoost/PowerBoost/Time-limited constant current mode (other overload behaviors can be set)
- Short-circuit protection
- Open circuit protection
- 1.1 x Io nom (typ.) current limitation function
Efficiency: 0.938
Mounting mode: DIN-35 rail
Measurement accuracy: ≤ 1% (output error)
Dimensions:
- H130mm x W35mm x D130mm
- H5.118" x W1.378" x D5.118"
Net Width (mm): 35mm
Ambient air temperature for operation: -25°C...+70°C
Ambient air temperature for storage: -40°C...+85°C
Humidity: 5-96% relative humidity (RH; non-condensing)
Current consumption:
- 1.3A
- 9.6A inrush (after 1 ms)
GTIN code: 4066970000000
ETIM code: EC002540
Customs Tariff Number: 85044083900
Order code / Manufacturer SKU: 2787-2134
Manufacturer product status: Commercialized
Equivalent to: 27872134
EAN code: 4066970000000
Compliant with standard(s):
- Safety and protection
- - Isolation voltage (pri.-sec.; AC) -- 3510V
- - Isolation voltage (pri.-PE; AC) -- 2200V
- - Isolation voltage (sec.-PE; DC) -- DC 0.5kV
- CE
- EN 61010-1
- EN 61010-2-201
- EN 61204-3
- SEMI F47
- UL 61010-1
- UL 61010-2-201
- General approvals
- - UL - Underwriters Laboratories Inc. - UL 61010-2-201 - certificate E255817
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - MFD for SEMI F47 - WAGO GmbH & Co. KG
- Approvals for hazardous areas
- - UL - Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS) - UL 121201 - certificate E198726
- RoHS compliant
Benefits:
- The WAGO Pro 2 Power Supply with units ranging from 120 to 960W.
- It can connect to both a PLC and IoT gateway via a snap-on type communication module.
- Intelligent monitoring functions achieve transparency.
- Save energy and space thanks to peak efficiency of 96.3%.
- The high-performance TopBoost or PowerBoost guarantee maximum system uptime.
- Comprehensive parameterization possibilities enable customized power supplies
- Communication possible with optional modules IO-Link / Modbus RTU / Modbus TCP /USB
Location of origin: China
Degree of pollution: 2
Ripple: 70mVpp (output voltage)
MTBF (Mean Time Between Failures): 1 200 000h (as per IEC 61709)
Cross-sells with:
- 2789-1233
- 2789-9015
- 2789-9023
- 2789-9052
- 2789-9080
Level 1 category: Automation components
Level 2 category: Power supply units
Product title: Pro2 switch-mode AC/DC power supply unit (SMPS PSU) - Wago (Pro 2 series)

More Information
Main function	Power supply unit
Product series / family name	Power supply units
Sub-range name	Pro 2 series
Supply voltage (AC)	100Vac, 240Vac
Supply voltage (DC)	200Vdc, 220Vdc
Rated current	5A < In ≤ 10A
Rated power (W)	100W < Pn ≤ 150W
Output voltage (DC)	10Vdc < Vout ≤ 15Vdc
Connection type (electrical)	Terminals (Spring)
Mounting mode	DIN rail
Degree of protection	IP20
Type - Input	1-phase AC, DC
Type - Option	special version (communication-capable), special version (with TopBoost)

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account