Wago - 750-636/000-800
$383.40
Wago - 750-636/000-800 is available to buy in increments of 1
Overview
DC Drive Controller; 24 VDC; 5 A; Interference-free; light gray
- Environmental requirements - Operating altitude:0 ... 2000 m / 0 ... 6562 ft
- Technical data - Indicators:LED (A-D) green: End Position +, End Position -, Preset, 24 V OK; LED (E, F) yellow: PWM Current Limitation, Position OK; LED (G, H) red: Reserved, Operating Fault
- Technical data - Number of outgoing power jumper contacts:2
- Technical data - Number of incoming power jumper contacts:2
- Technical data - Data width:32-bit set/actual value; 16-bit control or status
- Technical data - Voltage range for signal (0):-3 ... +1.5 VDC
- Technical data - Voltage range for signal (1):2.4 ... 30 VDC
- Technical data - Supply voltage (system):5 VDC; via data contacts
- Technical data - Supply voltage (field):24 VDC (-15 ... +20 %); via power jumper contacts (power supply via blade contact; transmission (supply voltage field side only) via spring contact)
- Technical data - Limit frequency:50kHz
- Technical data - PWM frequency (typ.):20kHz
- Material data - Color:light gray
- Technical data - Isolation:500 V system/field
- Connection data - Connection type 1:Inputs/Outputs
- Connection data - Solid conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Connection data - Fine-stranded conductor:0.08 ... 2.5 mm2 / 28 ... 14 AWG
- Mechanical Data - Mounting type:DIN-35 rail
- Environmental requirements - Mounting position:horizontal (standing/lying); vertical
- Technical data - Input characteristic:
- high-side switching
- Type 1
- Technical data - Encoder connection:A, B, zero low-side switching; 5 ... 24 VDC / open collector
- Technical data - Number of outputs:1 (A+; A-; H-bridge output)
- Physical data - Width:12 mm / 0.472 inches
- Material data - Housing material:Polycarbonate; polyamide 6.6
- Environmental requirements - Ambient temperature (operation):0 ... +55 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Permissible H2S contaminant concentration at a relative humidity
75 %:10ppm - Environmental requirements - Permissible SO2 contaminant concentration at a relative humidity
75 %:25ppm - Environmental requirements - Shock resistance:15g per IEC 60068-2-27
- Environmental requirements - Vibration resistance:per IEC 60068-2-6
- Technical data - Current consumption (5 V system supply):55mA
- Technical data - Current consumption, field supply (module with no external load):10mA
- Technical data - Input current (typ.):2.7 mA at 24 V
- Technical data - Current consumption (typ.):2 mA (UA)
- Technical data - Input current at specific input voltage:-3.2 mA at 0.3 V
- Technical data - Input current at specific input voltage (2):0 mA bei 5 V
- Commercial data - GTIN:4050820000000
- Commercial data - ETIM 8.0:EC001601
- Commercial data - ETIM 7.0:EC001601
- Commercial data - eClass 10.0:27-24-26-05
- Commercial data - eClass 9.0:27-24-26-05
- Commercial data - Customs tariff number:85389099990
- sku_code:750-636/000-800
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-MCM750
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- Environmental requirements - Exposure to pollutants:Per IEC 60068-2-42 and IEC 60068-2-43
- Material data - Conformity marking:CE
- Commercial data - Country of origin:DE
- Environmental requirements - Pollution degree:2 per IEC 61131-2
- ACCESSORIES_Markingaccessories:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- ACCESSORIES_Carrierrail:
- 210-112
- 210-113
- 210-114
- 210-115
- 210-118
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- ACCESSORIES_ShieldConnection:
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- ACCESSORIES_SystemBox:
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- ACCESSORIES_Supplymodule:
- 750-601
- 750-602
- 750-610
- 750-612
- manufacturer_description:DC Drive Controller; 24 VDC; 5 A; Interference-free
- picture_filename_1:1024-0200001100027294000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001100027294000100b6-DE.jpg
- Material data - Weight:55g
- Material data - Fire load:0.967MJ
- picture_filename_2:1024-020000100003df9e000100b6-DE.jpg
- picture_zoom_filename_2:2000-020000100003df9e000100b6-DE.jpg
- Physical data - Height:100 mm / 3.937 inches
- manufacturer_detailed_description:
This module is a single-channel, intelligent positioning controller for 24 VDC motors up to 5 A with incremental position feedback.
Three 24 V inputs record the limit switches and a preset signal. An incremental encoder interface evaluates signals from the position sensor and determines the actual value.
Where required, positioning optimizes the initial switching position as a function of direction, taking into account compensation for gearing backlash.
Bidirectional control of the DC motor is implemented via a short-circuit-proof, temperature-monitored H-bridge.
Both switched operation and soft start/stop or current reduction are possible via PWM control.
The field-side 24 V supply voltage from the power contacts, which is monitored for undervoltage/overvoltage events, is looped through to adjacent modules.
The module can also be used as:
a dedicated incremental encoder or as a switch and power controller (PWM).
- Physical data - Depth:67.8 mm / 2.669 inches
- Commercial data - Product Group:15 (I/O System)
- picture_filename_3:1024-020000110000e36c000100b6-EN.jpg
- picture_zoom_filename_3:2000-020000110000e36c000100b6-EN.jpg
- picture_filename_4:1024-020000260002a2f3000300b6-EN.jpg
- picture_zoom_filename_4:2000-020000260002a2f3000300b6-EN.jpg
- Physical data - Depth from upper-edge of DIN-rail:60.6 mm / 2.386 inches
- Environmental requirements - Protection type:IP20
- Environmental requirements - EMC emission of interference:per EN 61000-6-3
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2
- Technical data - Number of digital inputs:3
- Primary brand: Wago
- Functions: DC mtr. drive / controller
- Design:
- 20.4-28.8Vdc adjustable suppl. to field sensing devices
- interference-free
- Supply voltage (DC): 5Vdc (supplied by system)
- Frequency: 50kHz limit frequency
- Connection type: Push-in spring CAGE CLAMP connections
- Protection functions: short-circuit protection
- Mounting mode: DIN-35 rail
- Digital inputs: 3 x digital inputs (-3...+1.5Vdc / 2.5...30Vdc / A / B)
- Digital outputs: 1 x digital output (A+ / A- / H-bridge)
- Dimensions: H100mm x W12mm x D67.8mm
- Net Width (mm): 12mm
- Material: Polycarbonate (PC) / Polyamide (PA) 6.6 housing
- Ambient air temperature for operation: 0°C...+55°C
- Ambient air temperature for storage: -40°C...+85 °C
- Humidity: 95% relative humidity (RH; non-condensing)
- Mechanical resistance: Shock resistance according to EN 60068-2-27 --15g
- Current consumption:
- 55mA (5Vdc; system supply)
- 10mA (field supply; no external load)
- GTIN code: 4050820000000
- ETIM code: EC001601
- eClass code: 27-24-26-05
- Customs Tariff Number: 85389099990
- Order code / Manufacturer SKU: 750-636/000-800
- Manufacturer product status: Commercialized
- Equivalent to: 750636000000
- EAN code: 4050820000000
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-3
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-MCM750
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2009-145
- 2009-145/000-002
- 2009-145/000-005
- 2009-145/000-006
- 2009-145/000-007
- 2009-145/000-012
- 2009-145/000-023
- 2009-145/000-024
- 210-112
- 210-113
- 210-114
- 210-115
- 210-196
- 210-197
- 210-198
- 210-504
- 210-505
- 210-506
- 210-508
- 248-501
- 248-501/000-002
- 248-501/000-005
- 248-501/000-006
- 248-501/000-007
- 248-501/000-012
- 248-501/000-017
- 248-501/000-023
- 248-501/000-024
- 750-103
- 750-107
- 750-601
- 750-602
- 750-610
- 750-612
- 790-108
- 790-116
- 790-124
- 790-140
- 790-208
- 790-216
- 790-220
- 850-814/002-000
- 850-815/002-000
- 850-816/002-000
- 850-817/002-000
- 850-825
- 850-826
- 850-826/002-000
- 850-827
- 850-827/002-000
- 850-828
- 850-828/002-000
- 850-834
- 850-835
- 850-836
- Level 1 category: Automation components
- Level 2 category: Motor & motion control
- Level 3 category: Motion control (Servo motors and Drives)
- Level 4 category: DC servo drives
- Product title: DC mtr. drive / controller - Wago
| Main function | DC servo drive |
|---|---|
| Product series / family name | 750 series |
| Supply voltage (DC) | 5Vdc |
| Connection type (electrical) | Terminals (Spring) |
| Mounting mode | DIN rail |
| Degree of protection | IP20 |
| Type - Option | Standard (No options) |
Write Your Own Review