- Environmental requirements - Operating altitude (max.):2000m
- Technical data - Signaling - Status indicator:
- Red LED
- Mechanical
- Technical data - Load circuit - Recommended minimum load:10 V / 5 mA / 300 mW
- Safety and protection - Insulation type (control/load circuit):Basic insulation
- Safety and protection - Insulation type (adjacent devices):Reinforced insulation (safe isolation)
- Safety and protection - Insulation type (load/load circuit):Basic insulation
- Safety and protection - Insulation type (open contact):Functional insulation
- Technical data - Load circuit - Switching frequency with/without load (max.):20 min-1 / 200 min-1
- Technical data - Load circuit - Limiting continuous current:0
- Technical data - Load circuit - Inrush current (resistive) max.:(AC) 24 A / 4 s
- Technical data - Load circuit - Switching capacity:AC-15: 1.5 A / AC 240 V; DC-13: 0.1 A / DC 250 V
- Technical data - Load circuit - Switching power (resistive) max.:AC 3000 VA; DC (see load limit curve)
- Material data - Color:gray
- Safety and protection - Rated voltage:300V
- Technical data - Load circuit - Switching voltage (max.):AC 250 V
- Safety and protection - Rated surge voltage:2.5kV
- Safety and protection - Dielectric strength (control/load circuit) (AC, 1 min):2.5 kVrms
- Safety and protection - Dielectric strength (open contact) (AC, 1 min):1.5 kVrms
- Connection data - Connection technology:Push-in CAGE CLAMP(R)
- Connection data - Solid conductor:0.34 ... 1.5 mm2 / 22 ... 16 AWG
- Connection data - Fine-stranded conductor:0.34 ... 1.5 mm2 / 22 ... 16 AWG
- Connection data - Note (conductor cross-section):2 x 0.34 ... 2 x 1.5 mm2 / 1 x 2.5 mm2 / 2 x 22 ... 2 x 16 AWG
- Technical data - Control circuit - Input voltage range:-20 ... +10 %
- Technical data - Control circuit - Nominal input voltage UN:AC 230 V
- Mechanical data - Mounting type:DIN-35 rail
- Mechanical data - Mounting position:horizontal (standing/lying); vertical
- Technical data - Load circuit - Number of changeover/switchover contacts:2
- Physical data - Width:31 mm / 1.22 inches
- Technical data - Load circuit - Contact material (relay):AgNi
- Environmental requirements - Processing temperature:-25 ... +50 °C
- Environmental requirements - Ambient temperature (operation at UN):-40 ... +55 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +85 °C
- Environmental requirements - Relative humidity:5 ... 85 %
- Technical data - Control circuit - Nominal input current at UN:11 mA
- Technical data - Load circuit - Electrical life (NO; resistive load; 23 °C):100 x 10³ switching operations
- Technical data - Load circuit - Mechanical life:20 x 10^6 switching operations
- Commercial data - GTIN:4055140000000
- Commercial data - ETIM 8.0:EC001437
- Commercial data - ETIM 7.0:EC001437
- Commercial data - eClass 10.0:27-37-16-01
- Commercial data - eClass 9.0:27-37-16-01
- Commercial data - Customs tariff number:85364900990
- sku_code:858-528
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_Declarations of conformity and manufacturer's declarations:
- EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- UK-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- Standards and specifications - Standards/specifications:
- EN 61010-2-201
- EN 61810-1
- UL 508
- Safety and protection - Overvoltage category:II
- Commercial data - Country of origin:DE
- Safety and protection - Pollution degree:2
- ACCESSORIES_Markingaccessories:
- 2009-110
- 2009-115
- 209-128
- 209-145
- 209-183
- 209-184
- 210-110
- 249-105
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- ACCESSORIES_Tools:210-719
- ACCESSORIES_Ferrule:
- 216-241
- 216-242
- 216-243
- 216-244
- ACCESSORIES_Jumper:858-402
- Basic relay - WAGO Basic Relay:858-189
- ACCESSORIES_DisplayElement:788-125
- ACCESSORIES_Filter_module:788-148
- manufacturer_description:Relay module; Nominal input voltage: 230 VAC; 2 changeover contacts; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm2; gray
- picture_filename_1:1024-0200001300016996000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001300016996000100b6-DE.jpg
- Material data - Weight:85.3g
- Material data - Fire load:1.255MJ
- picture_filename_2:1024-020000120003ad41000100b6-DE.jpg
- picture_zoom_filename_2:2000-020000120003ad41000100b6-DE.jpg
- Physical data - Height:97 mm / 3.819 inches
- Commercial data - Product Group:6 (INTERFACE ELECTRONIC)
- picture_filename_3:1024-0200002400032535000100b6-DE.jpg
- picture_zoom_filename_3:2000-0200002400032535000100b6-DE.jpg
- picture_filename_4:1024-020000120003cccf000200b6-EN.jpg
- picture_zoom_filename_4:2000-020000120003cccf000200b6-EN.jpg
- Physical data - Depth from upper-edge of DIN-rail:73 mm / 2.874 inches
- Safety and protection - Protection type:IP20
- Technical data - Load circuit - Drop-out time (typ.):8ms
- Technical data - Load circuit - Pull-in time (typ.):10ms
- Primary brand: Wago
- Functions: Plug-in relay assembly
- Design:
- socket base
- red LED
- Electromechanical design
- 10V / 5mA / 300mW recommended minimum switching load
- Poles: 2-poles (2P)
- Rated current:
- 12A (continuous)
- 1.5A (250Vac; AC-15)
- 0.1A (24Vdc; DC-13)
- 24A (4s) AC inrush maximum current
- Rated operating voltage (Ue): 250V
- Rated voltage (AC): 250Vac max. (switching voltage)
- Rated impulse voltage (Uimp): 2.5kV
- Connection type: Push-in CAGE CLAMP spring connections
- Control Voltage (AC): 184-253Vac (230Vac nom.; 0.8...1.1 x Uc)
- Mounting mode: DIN-35 rail
- Response time:
- (OFF=>ON / contacts closing) 10ms / 0.010s
- (ON=>OFF / contacts opening) 8ms / 0.008s
- Contacts type: 2C/O / DPDT (Double Pole Double Throw) contact
- Dimensions:
- H97mm x W31mm x D73mm
- 31mm width
- Material: Silver-Nickel (AgNi) contacts
- Ambient air temperature for operation: -40°C...+55°C
- Ambient air temperature for storage: -40°C...+85°C
- Humidity: 5-85% relative humidity (RH)
- Electrical durability (with load): 100 000operations
- Mechanical durability (at no load): 20 000 000operations
- GTIN code: 4055140000000
- ETIM code: EC001437
- eClass code: 27-37-16-01
- Customs Tariff Number: 85364900990
- Order code / Manufacturer SKU: 858-528
- Manufacturer product status: Commercialized
- Equivalent to: 858528
- Compliant with standard(s):
- EN 61010-2-201
- EN 61810-1
- UL 508
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- - UK-Declaration of Conformity - WAGO GmbH & Co. KG
- RoHS compliant
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2009-110
- 2009-115
- 209-128
- 209-145
- 209-183
- 209-184
- 210-110
- 210-719
- 216-241
- 216-242
- 216-243
- 216-244
- 249-105
- 788-125
- 788-148
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- 858-402
- Level 1 category: Automation components
- Level 2 category: Control components
- Level 3 category: Control relays
- Product title: Plug-in relay assembly - Wago
| Main function | Relay |
|---|---|
| Product series / family name | 858 series |
| Poles | 2P |
| Rated current | 10A < In ≤ 15A |
| Connection type (electrical) | Plug-in, Terminals (Spring) |
| Control Voltage (AC) | 200Vac, 240Vac |
| Mounting mode | DIN rail |
| Contacts type | 2C/O, DPDT (Double Pole Double Throw) |
| Degree of protection | IP20 |
| Type - Option | with LED indicator |
Write Your Own Review