Wago - 857-369
$42.82
Wago - 857-369 is available to buy in increments of 1
Overview
Relay module; Nominal input voltage: 24 … 230 V AC/DC; 1 changeover contact; Limiting continuous current: 6 A; with gold contacts; Yellow status indicator; Module width: 6 mm
- Environmental requirements - Operating altitude (max.):2000m
- Technical data - Signaling - Status indicator:Yellow LED
- Technical data - Load circuit - Recommended minimum load:1 V / 1 mA / 1 mW
- Safety and protection - Insulation type (control/load circuit):Reinforced insulation (safe isolation)
- Safety and protection - Insulation type (between adjacent devices of the same type):Double insulation (safe isolation)
- Safety and protection - Insulation type (to adjacent devices of different types):Basic insulation
- Technical data - Load circuit - Switching frequency with/without load (max.):6 min-1 / 60 min-1
- Technical data - Load circuit - Limiting continuous current:0.25
- Technical data - Load circuit - Inrush current (resistive) max.:(AC) 20 A / 0.02 s
- Technical data - Load circuit - Switching capacity:AC-15: 3 A / AC 250 V; DC-13: 2 A / DC 24 V
- Technical data - Load circuit - Switching power (resistive) max.:AC 1500 VA; DC (see load limit curve)
- Safety and protection - Rated voltage:300V
- Technical data - Load circuit - Switching voltage (max.):AC 250 V
- Safety and protection - Rated surge voltage:4kV
- Safety and protection - Dielectric strength (control/load circuit) (AC, 1 min):3.51 kVrms
- Safety and protection - Dielectric strength (open contact) (AC, 1 min):1 kVrms
- Connection data - Connection technology:Push-in CAGE CLAMP(R)
- Connection data - Solid conductor:0.34 ... 2.5 mm2 / 22 ... 14 AWG
- Connection data - Fine-stranded conductor:0.34 ... 2.5 mm2 / 22 ... 14 AWG
- Connection data - Fine-stranded conductor; with insulated ferrule:0.34 ... 1.5 mm2 / 22 ... 16 AWG
- Technical data - Control circuit - Input voltage range:-30 ... +10 %
- Technical data - Control circuit - Nominal frequency range (input voltage):50 ... 60 HzAC / 0 HzDC
- Technical data - Control circuit - Nominal input voltage UN:AC/DC 24 ... 230 V
- Mechanical data - Mounting type:DIN-35 rail
- Mechanical data - Mounting position:Horizontal (standing/lying); vertical
- Technical data - Load circuit - Number of changeover/switchover contacts:1
- Physical data - Width:6 mm / 0.236 inches
- Technical data - Load circuit - Contact material (relay):AgNi + Au
- Environmental requirements - Processing temperature:-25 ... +50 °C
- Environmental requirements - Ambient temperature (operation at UN):-25 ... +70 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +70 °C
- Environmental requirements - Relative humidity:5 ... 85 % (no condensation permissible)
- Technical data - Control circuit - Nominal input current at UN:4 mA (230 VAC); 20 mA (24 VDC)
- Technical data - Load circuit - Electrical life (NO; resistive load; 23 °C):50 x 10³ switching operations
- Technical data - Load circuit - Mechanical life:5 x 10^6 switching operations
- Commercial data - GTIN:4050820000000
- Commercial data - ETIM 8.0:EC001437
- Commercial data - ETIM 7.0:EC001437
- Commercial data - eClass 10.0:27-37-16-01
- Commercial data - eClass 9.0:27-37-16-01
- Commercial data - Customs tariff number:85364900990
- sku_code:857-369
- Environmental Product Compliance - RoHS Compliance Status:Compliant,With Exemption
- approvals_General approvals:UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.4
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- Notes - Safety information:Adjacent devices of the same type are devices of the same design (series) that are arranged next to one another on the DIN-rail with the same orientation. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.
- Environmental Product Compliance - RoHS Exemption:
- 6(c)
- 7(a)
- 7(c)-I
- 7(c)-II
- Standards and specifications - Standards/specifications:
- EN 50121-3-2
- EN 61010-2-201
- EN 61810-1
- EN 61373
- EN 61000-6-2
- EN 61000-6-3
- EN 50121-3
- UL 508
- Safety and protection - Overvoltage category:III
- Commercial data - Country of origin:DE
- Safety and protection - Pollution degree:2
- ACCESSORIES_Markingaccessories:
- 2009-110
- 2009-115
- 209-128
- 209-183
- 209-184
- 210-110
- 249-105
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- ACCESSORIES_Tools:210-720
- ACCESSORIES_Ferrule:
- 216-241
- 216-242
- 216-243
- 216-244
- ACCESSORIES_Jumper:
- 281-482
- 859-402
- 859-402/000-005
- 859-402/000-006
- 859-402/000-029
- 859-403
- 859-403/000-005
- 859-403/000-006
- 859-403/000-029
- 859-404
- 859-404/000-005
- 859-404/000-006
- 859-404/000-029
- 859-405
- 859-405/000-005
- 859-405/000-006
- 859-405/000-029
- 859-406/000-005
- 859-406/000-006
- 859-406/000-029
- Basic relay - WAGO Basic Relay:857-151
- manufacturer_description:Relay module; Nominal input voltage: 24 ... 230 V AC/DC; 1 changeover contact; Limiting continuous current: 6 A; with gold contacts; Yellow status indicator; Module width: 6 mm
- picture_filename_1:1024-0200001d0001012c000100b6-DE.jpg
- picture_zoom_filename_1:2000-0200001d0001012c000100b6-DE.jpg
- Material data - Weight:31.9g
- Material data - Fire load:0.552MJ
- picture_filename_2:1024-0200001c0002b3bf000100b6-DE.jpg
- picture_zoom_filename_2:2000-0200001c0002b3bf000100b6-DE.jpg
- Physical data - Height:94 mm / 3.701 inches
- picture_filename_3:1024-0200001c000280ff000300b6-EN.jpg
- picture_zoom_filename_3:2000-0200001c000280ff000300b6-EN.jpg
- picture_filename_4:1024-0200000b000264b7000100b6-DE.jpg
- picture_zoom_filename_4:2000-0200000b000264b7000100b6-DE.jpg
- Physical data - Depth from upper-edge of DIN-rail:81 mm / 3.189 inches
- picture_filename_5:1024-0200001c000113b7000100b6-EN.jpg
- picture_zoom_filename_5:2000-0200001c000113b7000100b6-EN.jpg
- Safety and protection - Protection type:IP20
- Technical data - Load circuit - Drop-out time (typ.):25ms
- Technical data - Load circuit - Pull-in time (typ.):15ms
- Technical data - Load circuit - Bounce time (typ.):3.5ms
- Primary brand: Wago
- Functions: Plug-in relay assembly
- Design:
- socket base and ejector
- yellow LED
- Electromechanical design
- 1V / 1mA / 1mW recommended minimum switching load
- Poles: single-pole / 1-pole (1P)
- Rated current:
- 50mA (30Vdc; DC-13) (max. recommended current to avoid evaporating the Gold flash)
- 6A (continuous)
- 3A (AC-15; 250 Vac)
- 2A (DC-13; 24Vdc)
- 20A (20ms) AC inrush maximum current
- Rated operating voltage (Ue): 250V
- Rated voltage (AC): 250Vac max. (switching voltage)
- Rated impulse voltage (Uimp): 4kV
- Connection type: Push-in CAGE CLAMP spring connections
- Control Voltage (AC): 16.8-253Vac (24Vac / 120Vac / 220Vac / 230Vac nom.; 50/60Hz; 0.7...1.1 x Uc)
- Control Voltage (DC): 16.8-253Vdc (24Vdc / 120Vdc / 200Vdc / 220Vdc / 230Vdc nom.; 0.7...1.1 x Uc)
- Mounting mode: DIN-35 rail
- Response time:
- (OFF=>ON / contacts closing) 15ms / 0.015s
- (ON=>OFF / contacts opening) 25ms / 0.025s
- Contacts type: 1C/O / SPDT (Single Pole Double Throw) contact
- Dimensions:
- H94mm x W6mm x D81mm
- 6mm width
- Material: Hard Gold-plated Silver-Nickel (AgNi + Au) contacts
- Ambient air temperature for operation: -25°C...+70°C
- Ambient air temperature for storage: -40°C...+70°C
- Humidity: 5-85% relative humidity (RH; non-condensing)
- Electrical durability (with load): 50 000operations
- Mechanical durability (at no load): 5 000 000operations
- GTIN code: 4050820000000
- ETIM code: EC001437
- eClass code: 27-37-16-01
- Customs Tariff Number: 85364900990
- Order code / Manufacturer SKU: 857-369
- Manufacturer product status: Commercialized
- Equivalent to: 857369
- EAN code: 4050820000000
- Compliant with standard(s):
- Safety and protection
- Safety information -- Adjacent devices of the same type are devices of the same design (series) that are arranged
- next to one another on the DIN-rail with the same orientation. An end stop must be fitted to devices of other types
- for compliance with the reinforced insulation requirements.
- EN 50121-3
- EN 50121-3-2
- EN 61000-6-2
- EN 61000-6-3
- EN 61010-2-201
- EN 61373
- EN 61810-1
- UL 508
- General approvals
- - UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 508 - certificate E175199 Sec.4
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- RoHS compliant with exemption (6(c) / 7(a) / 7(c)-I / 7(c)-II)
- Location of origin: Germany
- Degree of pollution: 2
- Cross-sells with:
- 2009-110
- 2009-115
- 209-128
- 209-183
- 209-184
- 210-110
- 210-720
- 216-241
- 216-242
- 216-243
- 216-244
- 249-105
- 281-482
- 793-501
- 793-502
- 793-503
- 793-504
- 793-505
- 793-506
- 793-5501
- 793-566
- 859-402
- 859-402/000-005
- 859-402/000-006
- 859-402/000-029
- 859-403
- 859-403/000-005
- 859-403/000-006
- 859-403/000-029
- 859-404
- 859-404/000-005
- 859-404/000-006
- 859-404/000-029
- 859-405
- 859-405/000-005
- 859-405/000-006
- 859-405/000-029
- 859-406/000-005
- 859-406/000-006
- 859-406/000-029
- Level 1 category: Automation components
- Level 2 category: Control components
- Level 3 category: Control relays
- Product title: Plug-in relay assembly - Wago
| Main function | Relay |
|---|---|
| Product series / family name | 857 series |
| Poles | 1P |
| Rated current | In ≤ 1A |
| Connection type (electrical) | Plug-in, Terminals (Spring) |
| Control Voltage (AC) | 100Vac, 240Vac, 24Vac, 60Vac |
| Control Voltage (DC) | 100Vdc, 24Vdc, 250Vdc, 72Vdc |
| Mounting mode | DIN rail |
| Contacts type | 1C/O, SPDT (Single Pole Double Throw) |
| Degree of protection | IP20 |
| Type - Option | Gold-plated contacts, with LED indicator |
Write Your Own Review