Wago - 852-602
$994.50
Wago - 852-602 is available to buy in increments of 1
Overview
Industrial-Managed-Switch 8Port; metallic black, 1 pcs.
- Technical data - Configuration options:
- DIP switch for signal contact
- Web-Based Management
- Command Line Interface
- SNMPv1/v2c/v3
- Technical data - Indicators:Device: LED (PWR, RPS) green: Power supply (primary), redundant power supply (secondary); LED (ALM) red: Alarm or PROFINET error (with active PROFINET mode); pro Port: LED (100, LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 ... 8
- Technical data - Supply voltage:12 ... 60 VDC
- Mechanical Data - Color:black metallic
- Technical data - MAC table (size):16000 addresses
- Connection data - Connection technology: communication/fieldbus:Copper cable: 8 x RJ-45
- Technical data - Communication standards:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.1d Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- IEEE 802.1Q VLAN Tagging
- IEEE 802.1p Class of service
- IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
- PROFINET Conformance Class B
- Technical data - Number of 100 Mbit/s ports:8
- Technical data - Diagnostics:Signal contact; Port status; Port statistics; Port load; Traffic monitor; SFP information; Syslog; SNMP traps; PN diagnostics (cyclic and acyclic)
- Environmental requirements - Mounting type:DIN-35 rail
- Technical data - Baud rate:Copper cable: 10/100 Mbit/s
- Physical data - Width:50 mm / 1.969 inches
- Environmental requirements - Ambient temperature (operation):-40 ... +70 °C
- Environmental requirements - Ambient temperature (storage):-40 ... +80 °C
- Environmental requirements - Relative humidity (without condensation):0.95
- Environmental requirements - Shock resistance:per IEC 60068-2-27
- Environmental requirements - Vibration resistance:per IEC 60068-2-6
- Technical data - Power consumption (max.):12W
- Commercial data - GTIN:4055140000000
- Commercial data - ETIM 8.0:EC000734
- Commercial data - ETIM 7.0:EC000734
- Commercial data - Customs tariff number:85176200000
- sku_code:852-602
- Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
- approvals_General approvals:UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 61010-2-201 - certificate E175199
- approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
- approvals_Protocol and fieldbus specific certificates:Profi-Net - Siemens AG/ComDeC - certificate Z12462
- Commercial data - Country of origin:TW
- ACCESSORIES_WiringAndConnectors:
- 750-976
- 750-977/000-011
- 750-977/000-012
- 750-977/000-013
- 750-977/000-021
- 750-977/000-022
- 750-978/000-011
- 750-978/000-012
- 750-978/000-013
- 750-978/000-021
- 750-978/000-022
- 750-979/000-011
- 750-979/000-012
- 750-979/000-013
- 750-979/000-021
- 750-979/000-022
- ACCESSORIES_TransferModule:289-195
- ACCESSORIES_PowerSupply:
- 787-1602
- 787-1606
- 787-1622
- 787-1623
- 787-1632
- 787-1633
- 787-1635
- manufacturer_description:Industrial Managed Switch; 8-port 100Base-TX; PROFINET; Extended temperature range; black metallic
- picture_filename_1:1024-1937558-DE.jpg
- picture_zoom_filename_1:2000-1937558-DE.jpg
- picture_filename_2:1024-1937614-EN.jpg
- picture_zoom_filename_2:2000-1937614-EN.jpg
- Physical data - Height:162 mm / 6.378 inches
- manufacturer_detailed_description:The 852-602 Industrial Managed Switch is a configurable ETHERNET switch equipped with eight 10/100Base-TX copper ports. Packaged in a rugged housing, this switch offers both a redundant power supply and relay-based function monitoring.
The PROFINET certificate (conformity class B) guarantees easy integration into PROFINET automation systems using the device description file (GSD). In addition, the device supports the PROFINET Netload Class II.
The device supports flexible multi-port mirroring configuration via device description file or Web-Based Management. Function blocks allow cyclic PROFINET switch diagnostics to be efficiently implemented within the TIA Portal. An application note that outlines this process is available.
Features:- Web-based/SNMP management
- Redundant DC power supply
- Power supply range: 12 ... 60 VDC
- DIP switches to set alarm functions
- Full compliance with IEEE802.3, 802.3u, 802.3x, 802.1d, 802.1w, 802.1s, 802.1Q, 802.1p standards
- Media redundancy protocol (MRP) as manager (MRM) or client (MRC), redundant ring
- Non-blocking, store-and-forward switching, rapid spanning tree protocol (RSTP)
- Autonegotiation and AUTO-MDI/MDIC (crossover)
- VLAN (802.1Q) VID
- IGMP snooping
- Port configuration, status, statistics
- Port trunking and multi-port mirroring
- SNMP v1/v2c/v3 and RMON
- Time synchronization via SNTP
- Storm control, bandwidth limitation and loop detection
- Physical data - Depth:120 mm / 4.724 inches
- Environmental requirements - Protection type:IP30
- Environmental requirements - EMC emission of interference:per EN 61000-6-4
- Environmental requirements - EMC immunity to interference:per EN 61000-6-2
- Mechanical Data - Weight:882g
- Environmental requirements - Fire load:0.302MJ
- Technical data - Transmission medium (communication/fieldbus):Copper cable: Cat. 5e or higher, 100 m maximum cable length
- Primary brand: Wago
- Functions:
- Industrial managed Ethernet network switch
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.1d Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- IEEE 802.1Q VLAN Tagging
- IEEE 802.1p Class of service
- IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
- PROFINET Conformance Class B
- DIP switch for signal contact
- Web-Based-Management
- Command Line Interface
- SNMPv1/v2c/v3
- Design: redundant DC pwr. suppl.
- Supply voltage (DC): 12-60Vdc
- Programming languages:
- Configuration options
- - DIP switch for signal contact
- - Web-Based Management
- - Command Line Interface
- - SNMPv1/v2c/v3
- Connection capacity:
- 8-ports
- can manage up to 16 000 connections
- Connection type: 8 x RJ45 ports (100BASE-TX)
- Mounting mode:
- DIN-35 rail
- wall
- Dimensions: H162mm x W50mm x D120mm
- Net Width (mm): 50mm
- Ambient air temperature for operation: -40°C...+70°C
- Ambient air temperature for storage: -40°C...+80°C
- Humidity: 95% relative humidity (RH; non-condensing)
- Power consumption: 12W
- GTIN code: 4055140000000
- ETIM code: EC000734
- Customs Tariff Number: 85176200000
- Order code / Manufacturer SKU: 852-602
- Manufacturer product status: Commercialized
- Equivalent to: 852602
- EAN code: 4055140000000
- Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-4
- General approvals
- - UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 61010-2-201 - certificate E175199
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- Protocol and fieldbus specific certificates
- - Profi-Net - Siemens AG/ComDeC - certificate Z12462
- RoHS compliant
- Location of origin: Taiwan
- Cross-sells with:
- 289-195
- 750-976
- 750-977/000-011
- 750-977/000-012
- 750-977/000-013
- 750-977/000-021
- 750-977/000-022
- 750-978/000-011
- 750-978/000-012
- 750-978/000-013
- 750-978/000-021
- 750-978/000-022
- 750-979/000-011
- 750-979/000-012
- 750-979/000-013
- 750-979/000-021
- 750-979/000-022
- 787-1602
- 787-1606
- 787-1622
- 787-1623
- 787-1632
- 787-1633
- 787-1635
- Level 1 category: Automation components
- Level 2 category: Communication infrastructure
- Level 3 category: Switches
- Product title: Industrial managed Ethernet network switch - Wago
| Main function | Ethernet Switch |
|---|---|
| Product series / family name | 852 series |
| Switch design - Switch | managed |
| Switch design - RJ45 | 10/100Mbit x 8 ports |
| Switch design - M12 connections | none |
| Switch design - Fiber | no ports |
| Switch design - Combo | no slots |
| Switch design - Media modules | no slots |
| Switch design - Transceiver | no slots |
| Switch design - Option | special version (with redundant power supply) |
| Supply voltage (DC) | 12Vdc, 60Vdc |
| Connection type (electrical) | RJ-45 connector |
| Communication protocol | Ethernet/IP |
| Mounting mode | DIN rail, Surface |
| Network speed | 100Mbit/s |
| Degree of protection | IP30 |
Write Your Own Review