Wago - 852-303

Technical data - Configuration options:
- DIP switch for signal contact
- Command Line Interface
- SNMPv1/v2c/v3
Technical data - Controls:14 x DIP switch: Alarm function power supplies and ports 1 ... 10, 100/1000 Mbps fiber optic ports; 1 x Reset button: system restart
Technical data - Indicators:Device: LED (PWR, RPS, POST) green: Power supply (primary), redundant power supply (secondary), POST function; LED (ALM) red: Alarm; LED (LASER ON) yellow, LED (LNK/ACT, 100) green, LED (OFFLINE) red: Status of fiber optic ports; per port: LED (100, LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 ... 8
Technical data - Supply voltage:12 ... 60 VDC; Cable length: < 3 m
Mechanical Data - Color:black metallic
Technical data - MAC table (size):16000 addresses
Connection data - Connection technology: communication/fieldbus:Copper cable: 8 x RJ-45; Fiber optic: 2 x SFP slots (e.g., with SFP module and LC fiber-optic connector)
Technical data - Communication standards:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX/FX
- IEEE 802.3z 1000BASE-SX/LX
- IEEE 802.3x Flow Control
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1q VLAN Tagging
- IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
- IEEE 802.1p Prioritization
- IEEE 802.1x Port Authentication
Technical data - Optical fiber type:Single-Mode and Multi-Mode
Technical data - Number of 100 Mbit/s ports:8
Technical data - Number of 1 Gbit/s SFP ports:2
Technical data - Diagnostics:Signal contact, Modbus/TCP, port status, port statistics, port load, traffic monitor, SFP information, syslog, mail alarm, SNMP traps
Environmental requirements - Mounting type:DIN-35 rail
Technical data - Baud rate:Copper cable: 10/100 Mbit/s; Fiber optic:1000 Mbit/s
Physical data - Width:50 mm / 1.969 inches
Mechanical Data - Housing material:Aluminum
Environmental requirements - Ambient temperature (operation):-40 ... +70 °C
Environmental requirements - Ambient temperature (storage):-40 ... +80 °C
Environmental requirements - Relative humidity (without condensation):0.95
Environmental requirements - Shock resistance:per IEC 60068-2-27
Environmental requirements - Vibration resistance:per IEC 60068-2-6
Technical data - Power consumption (max.):12W
Commercial data - GTIN:4055140000000
Commercial data - ETIM 8.0:EC000734
Commercial data - ETIM 7.0:EC000734
Commercial data - eClass 10.0:19-17-01-30
Commercial data - eClass 9.0:19-17-01-06
Commercial data - Customs tariff number:85176200000
sku_code:852-303
Environmental Product Compliance - RoHS Compliance Status:Compliant,No Exemption
approvals_General approvals:
- KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-ISW852
- UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 61010-2-201 - certificate E175199
approvals_Declarations of conformity and manufacturer's declarations:EU-Declaration of Conformity - WAGO GmbH & Co. KG - certificate -
Mechanical Data - Conformity marking:CE
Commercial data - Country of origin:TW
ACCESSORIES_WiringAndConnectors:
- 750-976
- 750-977/000-011
- 750-977/000-012
- 750-977/000-013
- 750-977/000-021
- 750-977/000-022
- 750-978/000-011
- 750-978/000-012
- 750-978/000-013
- 750-978/000-021
- 750-978/000-022
- 750-979/000-011
- 750-979/000-012
- 750-979/000-013
- 750-979/000-021
- 750-979/000-022
ACCESSORIES_Plug:
- 852-1200
- 852-1210
- 852-1280
- 852-201/107-002
- 852-201/107-030
ACCESSORIES_TransferModule:289-195
ACCESSORIES_PowerSupply:
- 787-1602
- 787-1606
- 787-1622
- 787-1623
- 787-1632
- 787-1633
- 787-1635
manufacturer_description:Industrial Managed Switch; 8-port 100Base-TX; 2-Slot 1000BASE-SX/LX; black metallic
picture_filename_1:1024-0200001600010e15000200b6-DE.jpg
picture_zoom_filename_1:2000-0200001600010e15000200b6-DE.jpg
picture_filename_2:1024-020000130001670d000200b6-EN.jpg
picture_zoom_filename_2:2000-020000130001670d000200b6-EN.jpg
Physical data - Height:162 mm / 6.378 inches
manufacturer_detailed_description:The configurable 852-303 Industrial ETHERNET Switch is equipped with eight ports 10/100BASE-TX and two SFP slots 100BASE-FX/1000BASE-FX/SX (SFP modules are available as an option).
Packaged in a rugged housing, this switch offers both a redundant power supply and relay-based function monitoring. These functions, along with extensive ETHERNET switch options, make it ideal for a wide range of applications.
Features:
- Web-based/SNMP management
- Redundant DC power supply
- Wide supply voltage range: 12 ... 60 VDC
- DIP switch to set alarm functions
- Fully compatible with IEEE 802.3, 802.3u, 802.3z, 802.3x, 802.3ad, 802.3ab, 802.1d, 802.1q, 802.1p, 802.1w and 802.1x standards
- Xpress Ring (redundant ring, recovery < 50 ms)
- Non-blocking, store-and-forward switching, rapid spanning tree protocol (RSTP)
- Autonegotiation at all 10/100BASE-TX ports
- Auto-MDI/MDIX (crossover) at all 10/100BASE-TX ports
- VLAN (802.1q) VID
- IGMP snooping for multicast filtering
- Port configuration, status, statistics
- Port trunking
- SNMP v1/v2 and RMON
Physical data - Depth:120 mm / 4.724 inches
Environmental requirements - Protection type:IP30
Environmental requirements - EMC emission of interference:per EN 61000-6-4
Environmental requirements - EMC immunity to interference:per EN 61000-6-2
Mechanical Data - Weight:910g
Environmental requirements - Fire load:0.302MJ
Technical data - Transmission medium (communication/fieldbus):Copper cable: Cat. 5e or higher, 100 m maximum cable length; Fiber optic: SX Multi-Mode, LX Single-Mode
Primary brand: Wago
Functions:
- Industrial Gigabit (GbE/GigE) managed Ethernet network switch
- IEEE 802.3 10BASE-T / IEEE 802.3u 100BASE-TX/FX / IEEE 802.3z 1000BASE-SX/LX / IEEE 802.3x Flow Control / IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) / IEEE 802.1q VLAN Tagging / IEEE 802.1ab Link Layer Discovery Protocol (LLDP) / IEEE 802.1p Prioritization / IEEE 802.1X Port Authentication / ITU-T G8032v1/v2 Ethernet Ring Protection Switching (ERPS) communication standards
- DIP switch for signal contact
- Web-Based-Management
- Command Line Interface
- SNMPv1/v2c/v3
Design: redundant DC pwr. suppl.
Supply voltage (DC): 12-60Vdc
Programming languages:
- Configuration options
- - DIP switch for signal contact
- - Command Line Interface
- - SNMPv1/v2c/v3
Connection capacity:
- 11-ports
- can manage up to 16 000 connections
Connection type:
- 8 x RJ45 ports (100BASE-TX)
- 2 x SFP ports (single-mode/multi-mode; 100BASE-FX / 1000BASE-SX/LX)
- 1 x RS-232 port
Mounting mode:
- DIN-35 rail
- wall
Dimensions: H162mm x W50mm x D120mm
Net Width (mm): 50mm
Material: Aluminium housing
Ambient air temperature for operation: -40°C...+70°C
Ambient air temperature for storage: -40°C...+80°C
Humidity: 95% relative humidity (RH; non-condensing)
Power consumption: 12W
GTIN code: 4055140000000
ETIM code: EC000734
eClass code: 19-17-01-30
Customs Tariff Number: 85176200000
Order code / Manufacturer SKU: 852-303
Manufacturer product status: Commercialized
Equivalent to: 852303
EAN code: 4055140000000
Compliant with standard(s):
- EMC immunity to interference
- - EN 61000-6-2
- EMC emission of interference
- - EN 61000-6-4
- General approvals
- - KC - National Radio Research Agency - Article 58-2 / Clause 3 - certificate MSIP-REM-W43-ISW852
- - UL - Underwriters Laboratories Inc. (ORDINARY LOCATIONS) - UL 61010-2-201 - certificate E175199
- Declarations of conformity and manufacturer's declarations
- - EU-Declaration of Conformity - WAGO GmbH & Co. KG
- RoHS compliant
Location of origin: Taiwan
Cross-sells with:
- 289-195
- 750-976
- 750-977/000-011
- 750-977/000-012
- 750-977/000-013
- 750-977/000-021
- 750-977/000-022
- 750-978/000-011
- 750-978/000-012
- 750-978/000-013
- 750-978/000-021
- 750-978/000-022
- 750-979/000-011
- 750-979/000-012
- 750-979/000-013
- 750-979/000-021
- 750-979/000-022
- 787-1602
- 787-1606
- 787-1622
- 787-1623
- 787-1632
- 787-1633
- 787-1635
- 852-1200
- 852-1210
- 852-1280
- 852-201/107-002
- 852-201/107-030
Level 1 category: Automation components
Level 2 category: Communication infrastructure
Level 3 category: Switches
Product title: Industrial Gigabit (GbE/GigE) managed Ethernet network switch - Wago

More Information
Main function	Ethernet Switch
Product series / family name	852 series
Switch design - Switch	managed
Switch design - RJ45	10/100Mbit x 8 ports
Switch design - M12 connections	none
Switch design - Fiber	multi-mode, single-mode
Switch design - Combo	no slots
Switch design - Media modules	no slots
Switch design - Transceiver	SFP slots x 2
Switch design - Option	special version (with redundant power supply)
Supply voltage (DC)	12Vdc, 60Vdc
Connection type (electrical)	RJ-45 connector
Communication protocol	Ethernet/IP
Mounting mode	DIN rail, Surface
Network speed	1000Mbit/s, 1Gbit/s
Degree of protection	IP30

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account